After Hours Emergency Parts:
256-998-2806
After Hours Emergency Service:
256-777-7564
After Hours Emergency:
270-484-8299
Vermeer MC150 Mower Conditioner
- Backed by generations of hay and forage expertise
- Clean, consistent cut
- Fast dry-down for optimal nutrition
Shopping Tools
MC150 Mower Conditioner Features & Benefits
Simple maintenance, long-lasting durability
Simple and convenient are two key words to describe the Q3® cutter bar. Quick and convenient to check and replace key components — the Quick-Clip® blade retention system, Quick-Change™ shear ring and quick-check oil for each individual cutter unit.
Backed by 3-year cutter bar coverage.
Built with the operator in mind
Say goodbye to a tractor that’s dedicated to only mowing for the summer. Two hitch options provide a simple, one-person hookup — the drawbar swivel hitch or patented 2-point Quick Hitch — to help you get out to the field in no time.
Optimize hay quality with two different types of conditioners to select from for your operation. Steel rollers offer durability and powerful crimping action while rubber rollers focus on leaf retention of the crop.
Consistent, clean cut
Achieve a consistent, clean cut with hydraulic suspension. With this system, operators can conveniently adjust down pressure based on field conditions with the simple twist of a knob.
Adjust to different crops and conditions on the go. Toolless hydraulic pitch adjustment allows operators to change the angle of the blades on the cutter bar to help them achieve maximized yield while minimizing damage to the field.
Looking for a second cut as good as the first? Standard topping stops help protect the field by maintaining the integrity of the cutter bar flotation — preventing it from hitting the ground.
MC150 Mower Conditioner Specs & Compare
| Dimensions and Weights | |
| Transport Height | 73 in |
| Transport Width - ends up | 15.3 ft |
| Transport Length | 29.3 ft |
| Cutting Width | 15 ft |
| Working Height | 73 in |
| Working Width | 15.3 ft |
| Mower swung out offset | 80 in |
| Cutter bar lift height clearance | 17 in |
| Total Weight | 7000 lbs |
| Total weight - with steel roller conditioner | 7000 lbs |
| Tongue Weight | 1700 lbs |
| Suspension | Nitrogen-charged accumulator suspension system |
| Torque Protection | Friction over - running clutch — cutter bar; Banded V-belt — rollers |
| Tires | 33X15.5-16.5 |
| Tractor Requirements | |
| Tongue/hitch | Drawbar with swivel gearbox OR 2-point with swivel gearbox, category II or III N |
| Drive PTO | 1,000 rpm |
| PTO horsepower recommended | 105 hp |
| Hydraulic Type | 2 double-acting |
| Hydraulic Pressure | 1900 psi |
| Hydraulic flow rate | 6 gpm |
| Cutter bar | |
| Cutter bar type | Q3® cutter bar |
| Cut height | 1 in - 8 in (2.5 cm - 20 cm) |
| Number of Discs | 10 |
| Disc Diameter | 23 in |
| Disc Speed | 2700 rpm |
| Number of Blades | 20 |
| Angle Adjustment | Hydraulic pitch control |
| Quick Clip® blade retention system | Standard |
| Quick-Change™ shear ring | Standard |
| Curtain material | 1,400 gm/m2 polyester woven material with flexible PVC covering |
| 3-year limited cutter bar warranty | Standard |
| Features | |
| Skid Shoes | Optional wear skids |
| Highway Lights | Standard |
| Roller Conditioner | |
| Type | Intermeshing steel rollers or rubber rollers |
| Conditioner Drive | 4-band banded V-belt |
| Conditioner Width | 118 in |
| Roller Diameter | 9.3 in |
| Roller Speed | 740 rpm |
| Windrow width minimum | 62 in |
| Windrow width maximum | 112 in |
| Platform (for tall crops) | Standard |
| Topping high cut kit | Standard |