Schulte XH-1500 SERIES 5 INDUSTRIAL ROTARY CUTTER
Features
- Extra heavy duty 15 foot, rotary cutter with 240 horsepower Bondioli gearboxes with oil level sight glass and 1-3/4″ input shafts and 3” (75mm) output shaft, Extra heavy duty 275hp divider box
- Extra heavy duty Bondioli Cat 6 (G8) cutter deck drive lines
- High-torque, self adjusting wing slip clutches ensure better performance in rough cutting
- All grease points on the main mower body have been eliminated, spring steel greaseable bushings are used only in the walking axles. All other major pivot points are now use maintenance free, fibre wound bushings with 1 1/4″ diameter pins for strength.
- Single domed, sweep clean deck design eliminates excess weight over competitive double-deck designs, eliminates build up of debris and prevents rusting on top side of deck
- Walking or through axles are now available on both centre section and wings
- Increased ground clearance and a cutting chamber depth of 15 3/8” (2″ greater than the Series 4) and an increased blade tip speed, result in an unsurpassed material flow with improved cutting speed
- Extra large 10.5 X 27 skid steer tires, 29″ foam or air filled aircraft tires or 26″ laminated tires, allow for greater transport height along with improved performance in wet conditions
- The XH-1500 Series 5 incorporates a floating hitch through the use of tension links. These links are connected from the hitch to the rear beam and are allowed to free float in one direction. This system allows the front of the cutter to easily pass over obstacles without causing damages to the tension links or putting unnecessary stress on the deck.
- The hitch is also equipped with a bolt in, replaceable 2 1/4″ swivel which allows for maximum ground contouring without putting unnecessary twisting on the tractor draw bar.
- Hitch options include Schulte’s Precision Hitch, a standard clevis and our new Pro Level Hitch
- Centre suspension reduces stress on tractor draw bar
- 3/8” thick formed deck protection rings prevent blade to deck contact
- Double safety chains with individually replaceable links are standard equipment
- New adjustable and replaceable side skirt with skid shoes that are cast and cupped to reduce scrubbing on tight turns.
- Optional gauge wheel kit can be mounted on the left or right wing to aid in clearing road approaches during ditch mowing
- New wing lift tower, along with rugged hinge line allow for easier operation & increased strength. The double acting independent wing lift cylinder was designed to put less stress on wings and hinges
- Phased hydraulic cylinders are standard to provide level lifting across the width of the cutter. Centre and wing sections all raise and lower together. Cutting height is controlled by the centre depth stop for one touch levelling.
| Cutting width | XH1500 180" (4.57m) XH1000 126" (3.20m) |
| Overall width | XH1500 189" (4.80m) XH1000 139" (3.53m) |
| Overall length | XH1500 198" (5.03m) XH1000 198" (5.03m) |
| Overall length with walking axles | XH1500 207" (5.26m) XH1000 207" (5.26m) |
| Transport width, min. | XH1500 89" (2.26m) XH1000 89" (2.26m) |
| Transport height | XH1500 84" (2.13m) XH1000 84" (2.13m) |
| Deck thickness | 7GA (3/16") (4.6mm) |
| Side band skirt depth | 15 3/8" (.39m) |
| Side band skirt thickness | 1/4" (6.35mm) |
| Weight approx. with walking axles | 7360lbs (3338kg) |
| Transport hitch weight, approx. | 2500lbs (1134kg) |
| Minimum tractor HP | 70 HP (52kW) |
| Recommended tractor HP | 90 HP (67kW) |
| Cutting height | 1.5" to 19.25" (38 to 490m) |
| Ground clearance, transport | 18.5" (470mm) (26" tires) |
| Cutting capacity | 5" material (127mm) with brush blade |
| Blade overlap | 6.5" (165mm) |
| Divider gearbox rating | 275 HP (205kW) |
| Centre/wing gearbox rating | 240 HP (179kW)* |
| Blade tip speed, | 540 rpm |
| Centre | 848 rpm, 16,286 ft/min (4964m/min) |
| Wing | 986 rpm, 16,030 ft/min (4886m/min) |
| Blade tip speed, | 1000 rpm |
| Centre | 850 rpm, 16,390 ft/min (4996m/min) |
| Wing | 1002 rpm, 16,290 ft/min (4965m/min) |
| Wing working range | 25 degrees down to 90 degrees up |
| Wing float range | 25 degrees down to 45 degrees up |
| Drive Size centre and wings | Cat 6 |
| 540 CV | Cat 6 |
| 1000 CV | Cat 5 |
* Based on intermittent use.
SELECT THE CLOSEST LOCATION
-
Tanner, AL
After Hours Emergency Parts:
256-998-2806
After Hours Emergency Service:
256-777-7564
After Hours Emergency:
270-484-8299 -
Hopkinsville, KY
After Hours Emergency Parts:
270-887-4685
After Hours Emergency Service:
270-887-4685
After Hours Emergency:
270-887-4685 -
Mayfield, KY
After Hours Emergency Parts:
270-705-8806
After Hours Emergency Service:
270-705-4546
After Hours Emergency:
270-705-4546 -
Morganfield, KY
After Hours Emergency Parts:
270-952-4559
After Hours Emergency Service:
270-952-6411 -
Owensboro, KY
After Hours Emergency Parts:
270-577-2522
After Hours Emergency Service:
270-577-2522 -
Russellville, KY
After Hours Emergency Parts:
270-725-2437
After Hours Emergency Service:
270-847-3111 - Benton, IL
-
McLeansboro, IL
After Hours Emergency Parts:
618-308-7124
After Hours Emergency Service:
618-308-7643 -
Vergennes, IL
After Hours Emergency Parts:
618-534-3755
After Hours Emergency Service:
618-521-9902 -
Poseyville, IN
After Hours Emergency Parts:
812-305-4464
After Hours Emergency Service:
812-270-3148 -
Princeton, IN
After Hours Emergency Parts:
812-305-0262
After Hours Emergency Service:
812-385-6688 -
Washington, IN
After Hours Emergency Parts:
812-486-9028
After Hours Emergency Service:
812-486-8703 -
Columbus, MS
After Hours Emergency Parts:
662-889-1565
After Hours Emergency Service:
205-399-5530
After Hours Emergency:
205-367-7365 -
Brownsville, TN
After Hours Emergency Parts:
731-697-8990
After Hours Emergency Service:
731-432-9536
After Hours Emergency:
731-882-2844 -
Fayetteville, TN
After Hours Emergency Parts:
931-212-3209
After Hours Emergency Service:
931-619-7357
After Hours Emergency:
931-675-3973 -
Ethridge, TN
After Hours Emergency Parts:
931-201-1458
After Hours Emergency Service:
931-244-5394 -
McMinnville, TN
After Hours Emergency:
931-619-7594 -
Newbern, TN
After Hours Emergency Parts:
731-345-6394
After Hours Emergency Service:
731-345-6404
After Hours Emergency:
731-345-6350 -
Trenton, TN
After Hours Emergency Parts:
731-478-4286
After Hours Emergency Service:
731-345-6576
After Hours Emergency:
731-345-6546 -
Union City, TN
After Hours Emergency Parts:
731-514-0081
After Hours Emergency Service:
731-446-2216
After Hours Emergency:
270-356-6266