Features
| FEATURES | BENEFITS |
| Surpassed rugged industry standards | All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI. |
| 110 HP gearbox | A rugged heavy built gearbox capable of handling heavy cutting applications. |
| Cat. 4 drive-line with 4 plate slip-clutch | Excellent gearbox protection with the slip-clutch slipping when encountering obstruction in the blade path. Standard slip-clutch offers convenience over shear-bolts. |
| Cat. l or ll 3-point hitch | Allows use on a wider variety of tractors. |
| Lower clevis type 3-point hitch | Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design. |
| Heavy 10 gauge deck construction | Can withstand more abuse than lighter gauge decks. |
| 1/4" Side panels for overall reinforcement | Also protects sides from debris being thrown against them from the blades. |
| Fully welded deck | Robotically welded. Adds additional strength and reduces rust. |
| Extended front tapered deck | Contains and discharges material better. |
| Round back design | Allows for more efficient handling and dispersing of material. |
| 9" Deck Height | Allows cutter to handle heavy cutting conditions. |
| 2" to 12" Cutting height | Provides for a wide range of cutting conditions. |
| High cutting capacity | Can cut brushy areas with saplings up to 3". |
| Full length skids with replaceable shoes | Full length skids protect side plate structure, replaceable shoes for convenience. |
| 1/2" x 4" Heat-treated free swinging blades | Free swinging protects from obstructions. Heat-treated offers longer life. |
| Splined blade bar | Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft. |
| 3/16" Round stump jumper | Standard stump jumper aids in sliding over obstructions, which helps protect gearbox output shaft. |
| High blade tip speed | 60" =12,384 fpm and 72" = 14,861 fpm |
| 3" Dia. cutting capacity | Can aid in clearing brush. |
| Rugged laminated tail-wheel | Can't go flat. Choice of single or dual combination. |
| Chain or rubber shield option | Located on front and rear. Reduces flying debris. |
| Drive-line Holder | Keeps drive-line up out of dirt. Easier hook up of drive-line. |
Specs
| Model | RCR2660 |
| Machine Weight (with Chain Guards) | 1002 lbs. |
| Hitch | Category l or ll Quick Hitch Compatible with Floating Top Link, Quick Hitch Ready |
| Cutting Width | 60" |
| Overall Width | 67" |
| Overall Length (Including Tailwheel) | 110" |
| Deck Height | 9 1/8" (Bottom of Deck to Bottom of Skid Shoe) |
| Cutting Height | 2" - 12" |
| Cutting Capacity | 3" |
| Recommended Tractor HP | 35-130 maximum |
| PTO Speed | 540 rpm |
| Gearbox | 540 rpm PTO Driven Gearbox 1:1.46 Speed-Up Beveled Gears Cast Iron Housing |
| Gearbox Lubrication Capacity & Type | 7 pints of 80-90W EP oil |
| Gear box Input/ Output Shaft Size | Input Shaft = 1 3/8" - 6 Spline Output Shaft = 2" Dia. |
| Deck Construction | All welded construction |
| Deck Material Thickness | 10 Gauge |
| Side Panel Thickness | 1/4" |
| Skids | Replaceable |
| Stump Jumper | Round Pan 3/16" x 24" |
| Blades (2) | 1/2" x 4" x 25" Heat Treated Alloy Steel Free-Swinging High Lift |
| Blade Bolt | Keyed with harden flat washer and lock nut |
| Blade Tip Speed | 12,384 fpm/788 rpm |
| Drive-line | ASAE Category 4 |
| Drive-line Protection | 4 Plate Slip Clutch |
| Tail-wheel Mount Assembly | Welded arm and Caster Fork |
| Tail-wheel | 4.00 x 8 x 15 Laminated Tire with cast iron hub and tapered roller bearings |
| Front Guard | Optional: Chain Guard Available through Parts Department: Rubber Guard |
| Rear Guard | Optional: Chain Guard |
SELECT THE CLOSEST LOCATION
-
Tanner, AL
After Hours Emergency Parts:
256-998-2806
After Hours Emergency Service:
256-777-7564
After Hours Emergency:
270-484-8299 -
Hopkinsville, KY
After Hours Emergency Parts:
270-887-4685
After Hours Emergency Service:
270-887-4685
After Hours Emergency:
270-887-4685 -
Mayfield, KY
After Hours Emergency Parts:
270-705-8806
After Hours Emergency Service:
270-705-4546
After Hours Emergency:
270-705-4546 -
Morganfield, KY
After Hours Emergency Parts:
270-952-4559
After Hours Emergency Service:
270-952-6411 -
Owensboro, KY
After Hours Emergency Parts:
270-577-2522
After Hours Emergency Service:
270-577-2522 -
Russellville, KY
After Hours Emergency Parts:
270-725-2437
After Hours Emergency Service:
270-847-3111 - Benton, IL
-
McLeansboro, IL
After Hours Emergency Parts:
618-308-7124
After Hours Emergency Service:
618-308-7643 -
Vergennes, IL
After Hours Emergency Parts:
618-534-3755
After Hours Emergency Service:
618-521-9902 -
Poseyville, IN
After Hours Emergency Parts:
812-305-4464
After Hours Emergency Service:
812-270-3148 -
Princeton, IN
After Hours Emergency Parts:
812-305-0262
After Hours Emergency Service:
812-385-6688 -
Washington, IN
After Hours Emergency Parts:
812-486-9028
After Hours Emergency Service:
812-486-8703 -
Columbus, MS
After Hours Emergency Parts:
662-889-1565
After Hours Emergency Service:
205-399-5530
After Hours Emergency:
205-367-7365 -
Brownsville, TN
After Hours Emergency Parts:
731-697-8990
After Hours Emergency Service:
731-432-9536
After Hours Emergency:
731-882-2844 -
Fayetteville, TN
After Hours Emergency Parts:
931-212-3209
After Hours Emergency Service:
931-619-7357
After Hours Emergency:
931-675-3973 -
Ethridge, TN
After Hours Emergency Parts:
931-201-1458
After Hours Emergency Service:
931-244-5394 -
McMinnville, TN
After Hours Emergency:
931-619-7594 -
Newbern, TN
After Hours Emergency Parts:
731-345-6394
After Hours Emergency Service:
731-345-6404
After Hours Emergency:
731-345-6350 -
Trenton, TN
After Hours Emergency Parts:
731-478-4286
After Hours Emergency Service:
731-345-6576
After Hours Emergency:
731-345-6546 -
Union City, TN
After Hours Emergency Parts:
731-514-0081
After Hours Emergency Service:
731-446-2216
After Hours Emergency:
270-356-6266