After Hours Emergency Parts:
256-998-2806
After Hours Emergency Service:
256-777-7564
After Hours Emergency:
270-484-8299
Land Pride RTA2570
The RTA25 has uses in landscaping operations, nurseries, large gardens, and commercial operations. Standard Land Pride features like a stamped chain cover, stamped rear deflector, heavy-duty drive-line and storage stand, all come together in the name of quality and dependability. A parking stand provides easy hook-up and storage. Optional down pressure springs apply pressure on the rear deflector for tougher leveling conditions.
Shopping Tools
RTA2570 Features & Benefits
| FEATURES | BENEFITS |
| American made | Many tillers are imported. American made means better parts availability. |
| Tractor HP range | (RTA25 = 25 - 75 HP) and (RTA35 = 35 - 95 HP) |
| Working widths | (RTA25 = 70") And (RTA35 = 76") To meet specific customer needs |
| 8" Digging depth | For extra deep soil penetration and cultivation. |
| Stamped upper hitch plate | Stamped plate adds additional strength to hitch. |
| Hitch bolted to inside of support | Force is applied downward on top hitch, by bolting hitch to inside of support. Keeps hitch from 'spreading' outward. |
| Clevis Style Lower Hitch | Allows easier hook-up of lower 3-point arms. |
| Hitch Offset capability | Offset 5" by moving lower hitch points to cover right tire track. |
| Fits Land Pride Quick-Hitch | Allows for quick and easy one person hook-up. Offset can not be used with Quick-Hitch. |
| Adjustable Parking stand | Allows for easy hook-up and storage. |
| Adjustable skid shoes | Control depth with various settings. |
| Wear shield or left skid shoe | Shield protects lower portion of chain cover from wearing due to dragging in the soil. |
| Formed rear deflector with springs | Forming gives deflector additional strength. Springs allow deflector to ''bounce'' when obstructions are hit. |
| Rear gate down pressure springs (optional) | Forces the rear gate down to level even better. Easy-to-adjust chain tightener Cast iron chain tightener is a simple bolt adjustment to keep constant tension on the chain. |
| Four or six tines per flange | Six tines go through the ground better than four. |
| "C" Tines | C Tines take less horsepower to move through the ground. |
| Rotor swing diameter | (RTA25 = 17") And (RTA35 = 19") For deep tilling action and turning the soil over faster. |
| Double lip seal on rotor bearings | Double lip seal helps keep the dirt out and the grease in. |
| Cat. 3 driveline with slip-clutch protection | Heavy driveline for rough conditions. Slip-clutch protects other drive train components and saves having to replace shear bolts. |
| #100 Drive chain enclosed in oil bath | Heavy-duty drive chain reduces stretching, oil keeps constant lubrication and holds wear to a minimum. |
| Stamped chain cover | Stamped forming adds additional strength. |
RTA2570 Specs & Compare
| Model | RTA2570-06 |
| Recommended Tractor PTO HP | 25-75 Horsepower |
| Weight | 663 lbs. |
| Tilling Width | 70" |
| Overall Width | 75 5/8" |
| 3-Point Hitch Type | Category I, Adjustable Lower Hitch Clevis with Plated Pins |
| Quick Hitch Compatible Cat. I | Yes |
| Cat. II | No |
| Offset Capabilities | Yes, up to 5" maximum. May require offsetting the tractor’s lower 3-Point lift arms to achieve full 5" offset. (Cannot offset with Quick Hitch) |
| Number of Flanges | 9 |
| Number of Tines per Flange | 6 |
| Tine Construction | High Carbon heat treated “C” shaped blades |
| Skid Shoes | Adjustable |
| Storage Stands | Adjustable |
| Rear Deflector | Spring Loaded, adjustable, rear deflector |
| Driveline | ASAE Category III Heavy Duty Slip-Clutch |
| Gearbox | 45 HP at 540 rpm 1.92:1 Ratio |
| Gearbox Lubrication & Oil Capacity | SAE 80-90W EP oil |
| Gearbox Oil Capacity | 1.65 Pints |
| Drive Chain | #100 Roller chain Fully enclosed in oil bath with drain plug, fill plug and skid protection |
| Chain Case Oil Type | Shell Gadus S2 V2200 00 flowable grease or equivalent Land Pride Part #821-045C (32 oz. bottle) |
| Sprockets | |
| Rotor Swing Diameter | 17" |
| Rotor Shaft Speed | 220 rpm at 540 rpm power take-off speed |