After Hours Emergency Parts:
256-998-2806
After Hours Emergency Service:
256-777-7564
After Hours Emergency:
270-484-8299
Land Pride RCF3672
The Land Pride RCF36 Series Rotary Cutter is a brute, featuring a 190 HP gearbox capable of cutting heavy grass and weeds, row crop stubble, thick brush, and small trees up to 4" in diameter. The RCF36 has a smooth top design and offers a 2" to 12" cutting height range. These units come equipped standard with a 3/16" thick x 30-7/16" diameter heavy-duty stump jumper and replaceable bolt-on skid shoes. Safety guards for the front include rubber deflector, single chain guard or double chain guard options; rear options include either single- or double-chain guards or band.
Shopping Tools
RCF3672 Features & Benefits
| FEATURES | BENEFITS |
| Surpassed rugged industry standards | All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures. |
| 190 HP gearbox | A rugged heavy built gearbox capable of handling heavy cutting applications. |
| Cat. 5 driveline with 4-plate slip-clutch | Slip-clutch driveline offers convenience for continual work. |
| Dual position clevis type 3-point floating top link | Permits deck to follow the terrain for an even cut. Additional set of holes for tractors with shorter top links. |
| Lower clevis type 3-point hitch | Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design. |
| Heavy deck construction with 3/16" deck top & 1/4" side skirts | Strong heavy deck material for rugged use. |
| Box tubing deck supports | Makes for a stronger rigid deck. |
| Fully welded deck | Adds additional strength. |
| Round back design | Helps discharge grass better than enclosed or partially enclosed cutters. |
| 13 3/8" Deck Height | Allows cutter to handle heavy cutting conditions. |
| 2" to 12" Cutting height | Provides for a wide range of cutting conditions. |
| High cutting capacity | Can cut brushy areas with saplings up to 4". |
| Skid shoes | Provides sidewall reinforcement and protection to bottom of sidewall. |
| 1/2" x 4" Heat-treated free swinging blades | Free swinging protects from obstructions. Heat-treated offers longer life. |
| Splined blade bar hub | Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft. |
| 3/16" Plate stump jumper | Standard round stump jumper slides over stumps, rocks and debris. |
| High blade tip speed, 14,861 fpm | Ensures clean cut. |
| 15"Laminated tailwheel | Laminated material is long lasting in rough conditions and can't go flat. |
| 1 1/2" Heavy-duty spindle on tailwheel | Tailwheels take a beating, spindle gives the strength to protect tailwheel assembly. |
| Optional Guarding | Protect against flying debris. Customer can choose to include single chain, double chain or rubber guarding on the front and single chain or double chain guarding on the back. |
RCF3672 Specs & Compare
| Model | RCF3672 |
| Machine weight | 1337 lbs. with front and rear single chain guards |
| Hitch | Category I or II with Floating Clevis Top Link, Quick Hitch Adaptable |
| Cutting width | 72" |
| Overall width | 78 1/2" |
| Overall Length | 124 3/4" |
| Deck height (bottom of deck to bottom of skid shoe) | 13 3/8" |
| Cutting height | 2" to 12" |
| Cutting capacity | 4" Diameter |
| Recommended tractor power take-off horsepower | 60-190 horsepower |
| Power take-off speed | 540 rpm |
| Gearbox ratio | 1:1.48 Speed-Up Beveled Gears, Cast Iron Housing, 1 3/4"-20 spline input shaft and 2 3/8" output shaft |
| Gearbox Lubricant | EP 80-90W oil |
| Gearbox oil Capacity | 10 pints |
| Deck construction | All welded deck |
| Deck material thickness | 3/16" |
| Side skirt material thickness | 1/4" |
| Skid Construction | Replaceable bolt on skid shoes |
| Stump jumper | Round Pan 3/16" x 30 7/16" with Blade Holder Bar |
| Blades (2) | 1/2" x 4" Heat Treated Alloy Steel Free-Swinging High Lift - Low Friction |
| Blade bolts | Keyed with harden flat washers & lock nuts |
| Blade tip speed | 14,861 FPM |
| Drive-line | ASAE Category 5 with 4-plate Slip Clutch |
| Drive-line protection | Center Bolt 4 plate Slip Clutch |
| Tailwheel mount | Welded A-arm and Caster Fork with 360 degree swivel |
| Tailwheel | 4" x 8" x 15" Laminated Tire with cast iron hub |
| Front guard | Optional: Rubber Belting or Single Chain Guard or Double Chain Guard |
| Rear guard | Optional: Single Chain Guard or Double Chain Guard |