After Hours Emergency Parts:
256-998-2806
After Hours Emergency Service:
256-777-7564
After Hours Emergency:
270-484-8299
Land Pride RC4614
Land Pride's single wing, 14-foot RC4614 / RCM4614 Rotary Cutter, is designed for use in contract- and municipal mowing applications. Right of ways, roadsides, pastures, open areas, and row crop fields are all candidates for this heavy-duty cutter.
Shopping Tools
RC4614 Features & Benefits
| Features | Benefits |
| Surpassed rugged industry standards | All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures according to ISO 4254-13. |
| Factory assembled | Saves customer set-up time and money. Adjustments should always be made by dealer |
| 250 HP divider gearbox 210 HP center & wing gearboxes | Rugged heavy-built gearboxes capable of handling heavy-cutting applications. |
| Gearbox seal protection | Gearbox bottom seal protection for longer bearing life. |
| 2 3/8" Output gearbox shaft | Large output shaft handles shock loads better |
| Input driveline: Cat. 6 CV or Cat. 5 Conventional | Holds up to shock loads and harsh mowing conditions. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the driveline |
| Easy greasable drivelines | Drivelines have access holes for greasing the U-joints and to grease the inner profiles. |
| 4 Plate slip-clutch | Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline when impacts are encountered. |
| High blade tip speed | Allows clean cutting of material & even distribution. See Specifications for actual FPM. |
| 6" Blade overlap | Eliminates skipping during turns |
| Good cutting capacity | Can cut brushy areas with saplings up to 3" |
| 13" Deck height | Handles heavy cutting, which reduces balling-up of cut material under the deck. |
| Stump Jumper / Blade Holder | Heavy round stump jumper for protecting the gearbox seal and gearbox output shaft. Can hold up to tough conditions. |
| Spindle Nut Protected | Spindle nut and threads extending beyond the nut are guarded to protect against damage from hitting solid objects |
| 10 gauge smooth deck top | Reduces accumulation of debris and is easier and faster to clean. |
| 1/4" side skirt | Reduces debris piercing possibilities. |
| Self-leveling hitch | Reduces drawbar wear by keeping hitch level while going through ditches |
| Hinged wing section | Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and hollows can cause uneven cutting |
| 1" Solid hinge rod | Larger diameter hinge gives greater strength to cutter and hinge area |
| Wing transport lock | Holds transport wing in the folded-up position in case of hydraulic pressure loss. |
| Enclosed front to rear dual leveling rods | Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain. Many competitors only use one leveling rod. |
| 5-Bolt hubs | 5-Bolt hubs makes the wheel assembly more durable and longer lasting. |
| Drain holes in wheel rims | Allows water to drain from wheels mounted on the folded-up wing. Helps prevent paint deterioration and rusting to the wheel rims. |
| Spring-cushioned center axle | Protects unit from bumps and ground shock, cushions loads on drawbar. |
| Replaceable wheel spindles | Wheel spindles can be replaced when damaged without replacing the entire axle. Simply remove one bolt to replace damaged spindle. |
| Rephasing lift cylinders | Allows cutter to be leveled using hydraulic cylinders versus mechanical turnbuckles |
| 7/8" Leveling rods | Large diameter leveling rods provide superior supporting strength over rough terrain. |
| LP Performance Hitch option | Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and pivots about the tractor drawbar. |
| Bar-tite hitch option | Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear |
| Roadway light kit option | Allows operator to transport on public roads safer when headlights are turned on and/or when flasher lights are turned on. |
| Wheel options | Laminated tires: Eliminates flats. Air-filled tires: Give better cushion while transporting. Foam-filled tires: Give better cushion while transporting & can’t go flat. |
| Deck rings (optional) | Keeps blades from damaging the deck. |
RC4614 Specs & Compare
| Specifications & Capacities | RC4614 |
| Tractor horsepower | 70 to 250 hp |
| Gearbox horsepower | 250 hp splitter 210 hp center & wing |
| Gearbox oil capacity | 6.2 Pints: Divider gearbox 4.7 Pints: Center deck, right-hand deck spindle gearboxes |
| Gearbox lubrication | Gear lube 80-90W EP |
| Cutting capacity | 3" |
| Weights Total machine Tongue weight | 6,125 lbs. (Front & rear single chain guards, 5 AC tires, diamond blade bar with dishpan, without deck ring, CV driveline, and standard clevis.) 2,220 lbs. |
| Blade tip speed RC4614 RCM4614 | Up to 17,000 fpm Up to 18,000 fpm |
| Hitch types | Optional self-leveling clevis hitch, LP performance hitch, bar-tite hitch, pintle hitch, or ball hitch |
| Hitch jack | Standard (7,000 lbs.) |
| Cutting width Overall width Minimum transport width | 13' - 6" 14' - 9 1/4" 9' - 2 3/4" (With cutting height at 2") |
| Overall length | 17' - 8 1/2" (With cutting height at 2") |
| Deck height | 13" |
| Cutting height* | 2" to 12" |
| Lift hydraulics Center deck Right wing | 3 1/4" x 8" Rephasing hydraulic cylinder with hoses, fittings & stroke control spacers. 3" x 8" Rephasing hydraulic cylinder with hoses & fittings. |
| Wing folding hydraulics | 3" x 12" single-acting hydraulic cylinder complete with hose & fittings. |
| Wing flex | 45o up, 20o down while cutting. |
| Deck material | 1 - Piece, 10 gauge. |
| Side skirt material | 1/4" plate. |
| Skid shoes Wing deck Center deck Weight box | Replaceable: 1 Standard straight skid shoe and 1 AR400 leading skid shoe Replaceable: 2 Skid shoes Reversible & replaceable: 1 Skid shoe |
| 4 Blades (2 per carrier) | 1/2" x 4" Heat treated free swinging alloy steel with up lift. |
| Blade overlap | 6" |
| Blade bolt | Keyed with hardened flat washer & locknut. |
| Stump jumper / blade holder | Standard: 1" thick diamond blade bar Optional: 1" thick diamond blade bar with round dishpan |
| Deck ring | Optional 3/8" formed and welded. |
| Front & rear guards | Single chain or double chain. |
| Input driveline | ASAE Cat. 6 with constant velocity u-joint. |
| Intermediate & wing drivelines | Cat. 5 with slip-clutch |
| Tire options | 6" x 9 x 21" Laminated tires 27" x 7.75" Used aircraft tires with foam filling 29" x 9" Used aircraft tires without foam filling |
| Number of wheels | 5 - Wheel option: 4 on transport axle and one on wing axle. 6 - Wheel option: 4 on transport axle and two on wing axle. |
| Standard transport axle | Spring-cushioned on center transport axle. |
| Axle fasteners | 1 1/4" Greasable pins |
| Hubs | Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts. |
| Colors Standard color Optional colors | Beige Red, Green, or Orange |