After Hours Emergency Parts:
256-998-2806
After Hours Emergency Service:
256-777-7564
After Hours Emergency:
270-484-8299
Land Pride WC1504
QUICK-HITCH COMPATIBLE
Our Quick-Hitch System allows you to quickly connect and disconnect from the implement - most without leaving the tractor seat. This is a real time saver when working on multiple projects.
SUPPORT STANDS
Adjustable support stands help you match up to a tractor easier and allows the unit to sit on the ground while keeping the driveline near level. Extends life of driveline u-joints. 270°
DISCHARGE CHUTE
Adjustable rotating discharge chute directs where wood chips will be discharged. Chute rotate stops keep the chute from discharging chips toward the operator.
CUTTING KNIVES
1/4" Hardened steel cutting knives are reversible and replaceable. Each knife has two cutting edges - when one is worn, rotate 180° to a new cutting edge. Less downtime required to sharpen rotor knives. WC1503 - 2 knives / WC1504 - 4 Knives.
Shopping Tools
WC1504 Features & Benefits
| Features | Benefits |
| Quick Hitch Adaptable | Quickly and easily attach chipper to tractor with one person. |
| 1/4" Thick Rotor Knife | Rotor features 4 replaceable 1/4" hardened steel cutting edges. |
| Rotor Knives Can Be Rotated When One Cutting Edge Is Worn | Each rotor knife has two cutting edges to extend rotor knife life. When one edge is worn, rotate rotor knife 180° to a new cutting edge. Less downtime required to sharpen rotor knives. |
| Rotor Knives Are Replaceable | Can replace rotor knives when all cutting edges are worn out |
| 4-Bolt Flanged Bearings | Improves bearing life |
| Cat. 4 Shear-Bolt Driveline | Shear-bolt protects the unit when obstructions are encountered |
| Skid Extension Supports | Allows the unit to sit on the ground while keeping the driveline near level. Extends life of driveline u-joints. |
| Adjustable Rotating Discharge Chute With Rotation Stops | Directs direction wood chips will be discharged. Chute rotate stops keep the chute from discharging chips toward the operator feeding product toward the feed chute. |
| Adjustable Deflector Chute | Helps control the distance wood chips will be discharged away from the Wood Chipper. |
| Self-Feeding System | Product is pulled in by the sharp cutting edges with each pass of a rotor knife. Operator can be retrieving the next object to load while the unit is chipping the last limb loaded into the feed chute. |
WC1504 Specs & Compare
| Model | WC1504 |
| HP Required | 20 to 50 HP (Minimum 35 HP for maximum capacity) |
| Weight | 450 lbs. |
| Hitch | Cat. l w/ Quick Hitch capabilities |
| Upper Hitch Plate Thickness | 5/16" |
| Main Frame Thickness | 3/16" |
| Rotor Housing Thickness | 3/16" |
| Driveline Category | Cat. 4 with shear bolt |
| PTO Speed | 540 RPM |
| Rotor Speed | 540 RPM (Direct Drive) |
| Rotor Size | 25" |
| Chip Capacity | 4" |
| Hopper Inlet Opening | 20" x 20" |
| Chipper Inlet Opening | 10" x 4" |
| Spout Discharge Opening | 5 1/4" Square |
| Rotor Knife | Reversible and Replaceable |
| Number of Rotor Knives | 4 |
| Rotor Knife Size | 6" x 2" x 1/4" |
| Rotor Knife Material | Hardened Steel (Specifically designed for chipping) |
| Feed System | Self-feed |
| Feed Height Above Ground | 24" to 30" With adjustable stands |
| Feed Height Adjustment | 6 Settings (Includes without adjustable skids) |
| Chip Chute Position | 270 degrees |
| Discharge Height | 58" to 64" |
| Color | Orange, Green & Beige |