After Hours Emergency Parts:
256-998-2806
After Hours Emergency Service:
256-777-7564
After Hours Emergency:
270-484-8299
Land Pride WC1503
Quick-Hitch Compatible
Our Quick-Hitch System allows you to quickly connect and disconnect from the implement - most without leaving the tractor seat. This is a real time saver when working on multiple projects.
Support Stands
Adjustable support stands help you match up to a tractor easier and allows the unit to sit on the ground while keeping the driveline near level. Extends life of driveline u-joints.
270° Discharge Chute
Adjustable rotating discharge chute directs where wood chips will be discharged. Chute rotate stops keep the chute from discharging chips toward the operator.
Cutting Knives
1/4" Hardened steel cutting knives are reversible and replaceable. Each knife has two cutting edges - when one is worn, rotate 180° to a new cutting edge. Less downtime required to sharpen rotor knives. WC1503 - 2 knives / WC1504 - 4 Knives.
Shopping Tools
WC1503 Features & Benefits
| Features | Benefits |
| Quick Hitch Adaptable | Quickly and easily attach chipper to tractor with one person. |
| 1/4" Thick Cutting Knife | Rotor features 2 replaceable 1/4" hardened steel cutting edges |
| Knives Can Be Rotated When One Cutting Edge Is Worn | Each knife has two cutting edges to extend knife life. When one edge is worn, rotate knife 180° to a new cutting edge. Less downtime required to sharpen knives |
| Knives Are Replaceable | Can replace knives when all cutting edges are worn out. |
| Two V-Belts | Designed to handle shock loads. |
| Spring Loaded Adjustable Idler | Allows for constant and proper tension on belt. |
| 2-Bolt Flanged Bearings | Improves bearing life. |
| Cat. ll Shear-Bolt Driveline | Shear-bolt protects the unit when obstructions are encountered. |
| Skid Extension Supports | Allows the unit to sit on the ground while keeping the driveline near level. Extends life of driveline u-joints |
| Adjustable Rotating Discharge Chute With Rotation Stops | Directs direction wood chips will be discharged. Chute rotate stops keep the chute from discharging chips toward the operator feeding product toward the feed chute. |
| Adjustable Deflector Chute | Helps control the distance wood chips will be discharged away from the Wood Chipper |
| 9,090 FPM Knife Speed | For cleaner cut and better discharge of wood chips. |
| Self-Feeding System | Product is pulled in by the sharp cutting knives with each pass of a knife. Operator can be retrieving the next object to load while the unit is chipping the last limb loaded into the feed chute. |
WC1503 Specs & Compare
| Model | WC1503 |
| HP Required | 12 to 30 HP (Minimum 25 HP for maximum capacity) |
| Weight | 369 lbs. |
| Hitch | Cat.1 w/ Quick Hitch capabilities |
| Upper Hitch Plate Thickness | 1/4" |
| Main Frame Thickness | 3/16" |
| Rotor Housing Thickness | 3/16" |
| PTO Speed | 540 RPM |
| Driveline Category | Cat. 2 with shear bolt |
| Main Drive Pulley Diameter | 16.35" |
| Rotor Pulley Diameter | 4.5" |
| Belts | 2 single B section |
| Belt Tensioners | Spring loaded with adjustment |
| Rotor Size | 17.5" |
| Rotor Speed | 1984 RPM |
| Chip Capacity | 3" |
| Hopper Inlet Opening | 14"x 15" |
| Chipper Inlet Opening | 6" x 3" |
| Spout Discharge Opening | 3 1/4" Square |
| Cutting Knife | Reversible and Replaceable |
| Number of Knives | 2 |
| Knife Size | 2.5" x 2" x 1/4" |
| Knife Material | Hardened Steel (Specifically designed for chipping) |
| Feed System | Self-feed |
| Chip Chute Position | 270 degrees |
| Feed Height Above Ground | 35" (Without adjustable skids) |
| Feed Height Adjustment | 6 Settings (Includes without adjustable skids) |
| Color | Orange, Green & Beige |