After Hours Emergency Parts:
256-998-2806
After Hours Emergency Service:
256-777-7564
After Hours Emergency:
270-484-8299
Quick-Hitch Compatible
Our Quick-Hitch System allows you to quickly connect and disconnect from the implement - most without leaving the tractor seat. This is a real time saver when working on multiple projects.
Single Spear
Single spear punches a hole in end of bale, not in the circumference which prevents moisture from entering. Two short bale spikes keep bale from rotating on the single spear.
Replaceable Spear and Spikes
Spear and spikes are easily replaced if damaged.
| Features | Benefits |
| Designed to fit Cat.I & Cat. II 3-Point hitches | Works well with a lot of tractors |
| 3-point is Quick Hitch compatible | Easy to hook-up and unhook with a Quick Hitch. Bale Spear must be supported on blocks to use the Quick Hitch. |
| Replaceable spear and spikes | Spears and spikes are easily replaced if damaged. |
| Bales can be pushed with a single spear | Good for pushing bales onto side dump trailers. |
| Spear punches a hole in end of bale not in the circumference | Very little moisture can enter the bale where spears punch. Grappling type bale lifts punch holes in the circumference allowing moisture to penetrate the bale and accelerates bale deterioration |
| Single spear includes two short bale spikes | Bale spikes keep bale from rotating on the single spear. |
| Single spear takes less force to push the spear into the bale | Bales of all sizes won't shift positions as easily while pushing the spear into the bale. Single spears are ideal for lifting smaller lighter bales. |
| Model | BSR10 |
| Frame lift capacity 24" from face of frame | 1 - Round bale up to 2,000 lbs |
| 3-Point hitch category | Cat. I & Cat. II |
| Quick Hitch Compatible | Yes, if Bale Spear is supported on blocks. |
| Spear diameter | 1 3/4" |
| Number of spears | 1 |
| Spear overall length | 49" |
| Spear probe length Face of frame to end of point | 44 1/2" |
| Weight of unit | 112 lbs. |
| Number of spikes | 2 |
| Spike diameter and probe length | 1 1/4" |
| Spike probe length Face of frame to end of point | 14" |