Land Pride's RBT55120 Series 3-Way Hydraulic Rear Blade are built tough from the ground up. Make manual or hydraulic adjustments; angle, tilt, or offset to meet the demands of heavy-duty jobs. The blade, with its reversible cutting edge, can be angled left or right up to 45°, the ends can be tilted up or down by as much as 15°, and the whole blade can be offset to the left or right by as much as 33". The blade can also be rotated 180° for blading in reverse with the same angling, tilting and offset capabilities.

  • Get a Quote Value Your Trade
  • Send to a Friend
  • Payment Calculator

    • Get information on the RBT55120

    Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

    Send your friend information on the RBT55120

    Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

    Requesting Trade In on RBT55120

    Contact Information
    Equipment Interested In
    Trade Information

    Request A Demo

    Fields with asterisks* are required.

    Loan Calculator

    Use the Loan Calculator to help you determine the financing and payment options that are best for you.

    Amount Financed ($)
    Interest Rate (%)
    Loan Term in Months
    Monthly Payment Calculated

    **The accuracy of this calculator and its applicability to your circumstances is not guaranteed. You should obtain personal advice from qualified professionals. This information is provided for illustrative purposes only and does not constitute an application. This notice does not guarantee loan approval, nor is it an offer or commitment to make a loan to you on the above terms.

Shopping Tools
Contact Salesman
Request Demo
Apply for Financing

RBT55120 Features & Benefits

FEATURESBENEFITS
120" Working widthCan handle large capacities.
90-180 hp rangeFits a wide variety of tractors.
Cat. 2 and 3Bushing provided to go from Cat. 2 to Cat. 3 enables a wider variety of tractors to be used.
Quick hitch compatibleCompatible with Land Pride Quick hitch for easy attachment and removal. Increases
productivity.
Blade angles left or right up to 45°in either direction(15 positions manually: Center, 7 clockwise and 7 counterclockwise) (Hydraulically: Any degree up to 45°) Allows operator to set the blade at the angle of his choice up to 45o to move the desired amount of material with satisfactory results.
Blade offsets left or right up to 33”(15 positions manually: Center, 7 positions left and 7 positions right) (Hydraulically: Any position up to 33”) Allows the operator to position the end of the moldboard beyond tractor tire and close to solid obstacles such as fences, buildings and abutments.
Blade tilts up or down up to 15°Allows the operator to do simple tasks such as putting a crown in the middle of a road to making V-type ditches of various sizes.
Fully welded reinforced main frameOverall mainframe strength is enhanced due to being fully welded.
Heavy-duty pivot assembly with 4” solid steel kingpin1” Plate steel turntable and 4” kingpin for handling the high amount of torque that can be transferred to this area.
Formed 19” moldboard with top lip reinforcementFormed moldboard with 90° bent top for additional strength. Tall moldboard allows for a great deal of material to be moved.
5/16” Moldboard with 1/4” reinforcementHeavy-duty moldboard to handle loads from 180 HP tractors.
Heavy-duty pivot assembly1” Plate steel turntable and 4” kingpin handle tremendous torque delivered by up to 180 HP tractors.
Grease points in front pivot shaftHelps front pivot shaft to easily move.
Reversible cutting edgeLengthens blade life by being able to turn cutting edge over and use other edge.
Retractable parking standEnables one person hook-up and keeps the mainframe off of the ground.
Skid shoes (Optional)Skid shoes protect moldboard from hitting low lying obstructions such as manhole covers.
End plates (optional)End plates allow the blade to hold material in to drag from one spot to another.
Hardened wear edges (optional)Attach to outer edges of moldboard to prevent to wear in moldboard during ditching.
Single or dual gauge wheels (optional)Gauge wheels position the height of the blade to aid in grading.

RBT55120 Specs & Compare

ModelRBT55120
Blade width120"
Approximate weight (lb)
with manual links		1753 lb
Horsepower rating90-180
Maximum G.V.W. (lb)15,000
Hitch typeCat. 2 & 3 (Fits Land Pride Quick Hitch)
Blade angle, hydraulic operatedUp to 45° clockwise and counterclockwise with blade facing forward or reversed
Angle cylinder4 1/2" x 16" x 2"
Blade offset, hydraulic operatedUp to 33" left and right
Offset cylinder4 1/2" x16" x 2"
Blade tilt, hydraulic operatedMaximum 15° up and 15° down with blade facing forward or reversed
Tilt cylinder3" x 8" x 1 1/4"
Moldboard height19"
Moldboard thickness5/16" with reinforced channel
Cutting edge1/2" x 6" Heat treated, replaceable & reversible (double bevel)
Main frameFully enclosed welded, formed box
Park standRetractable
AccessoriesSingle or dual gauge wheel, (manual or hydraulic), skid shoes,
end plates, hardened wear edge plates, double selector valve,
manual angle link, manual offset link, and manual tilt link