Kubota by Land Pride: A great choice for contractors, landscapers, and forestry departments, the SSG2524 Stump Grinder turns large stumps into small chips. It features durable carbide teeth mounted to a 1/2" cutting wheel that spins up to 1,100 rpm. Fully controllable from inside the cab, this unit has a maximum cutting arc of 55 degrees and depth of 8" below ground. Only available through Kubota Dealers.

  • Get a Quote Value Your Trade
  • Send to a Friend
  • Payment Calculator

    • Get information on the SSG2524

    Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

    Send your friend information on the SSG2524

    Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

    Requesting Trade In on SSG2524

    Contact Information
    Equipment Interested In
    Trade Information

    Request A Demo

    Fields with asterisks* are required.

    Loan Calculator

    Use the Loan Calculator to help you determine the financing and payment options that are best for you.

    Amount Financed ($)
    Interest Rate (%)
    Loan Term in Months
    Monthly Payment Calculated

    **The accuracy of this calculator and its applicability to your circumstances is not guaranteed. You should obtain personal advice from qualified professionals. This information is provided for illustrative purposes only and does not constitute an application. This notice does not guarantee loan approval, nor is it an offer or commitment to make a loan to you on the above terms.

Shopping Tools
Contact Salesman
Request Demo
Apply for Financing

SSG2524 Features & Benefits

FeaturesBenefits
Universal quick attach mounting systemFor quick and easy attachment.
8" Digging depthA good depth below the ground. Removes base of most trees.
Adjustable skid shoesAdjustable to fit all sizes of skid steers.
Pivoting discharge deflectorDischarge deflector pivots up while cutting wheel is digging into the ground.
Welded on serrated stepGood safe step for accessing skid steer operator's seat.
High-speed cutting wheelCuts faster with less vibration.
Permanent hose holdersHoses aren't zip-tied to the frame. Zip ties can break over time.
Replaceable carbide cutting teethCutting teeth are easy to replace. Carbide tips for extra long life.
Hydraulic hose linesHydraulic hoses absorb shock. Steel hydraulic lines crack from vibration.
Case drain hydraulic lineProtects against component damage.
Keyed, tapered spindle on end of
hydraulic motor		Able to draw cutting wheel tight against the tapered shaft providing an excellent
fit-up and less likely to shear the key off.
Cutting wheel designed with wheel puller access holesMakes it easier to pull the cutting wheel off of the motor spindle.
Attached rain tight manual holding tubeKeeps manual with stump grinder for quick easy access. Manual won't get wet.
Offset articulating armAllow for optimum line-of-site from operator's seat

SSG2524 Specs & Compare

Specifications & CapacitiesSSG2524
Mounting PlateQuick Attach
Main Frame6 x 6 x 1/4 (152 x 152 x 6) Tube
Overall Mounting Width48 (1.22)
Overall Length60 (1.52)
Overall Weight540 (244.9)
Drive And Control SystemHydraulic motor with electric over hydraulic
Hydraulic Requirements17 to 32 (64.4 to 121.1)
Cutting Wheel Speed470 to 875 rpm
Articulate Cylinder3 (7.6) x 6 (15.2) stroke with 1 1/4 (3.2) rod dia.
Tilt Cylinder3 (7.6) x 6 (15.2) stroke with 1 1/4 (3.2) rod dia.
Hydraulic Lines & Hoses3/4 (19) I.D. Hydraulic hoses with crimp on cordura sleeve
1/4 (6) I.D. Case drain hydraulic hose
Number of Cutting Teeth
Straight
Left-Hand
Right-Hand
8 - Replaceable carbide teeth
12 - Replaceable carbide teeth
12 - Replaceable carbide teeth
Cutting Arc55 Degrees
Maximum Cutting Depth Below Ground8 (20.3)
Greasable Hinge PointsYes
ColorBlack
Outside Cutting Wheel Diameter23 3/4 (60.3)
Cutting Wheel Thickness1/2 (13)
Maximum Pressure Rating3500 (24.1)