After Hours Emergency Parts:
256-998-2806
After Hours Emergency Service:
256-777-7564
After Hours Emergency:
270-484-8299
Kinze Mach Till 412
Width 41′ | transport width 16′
Kinze’s 412 Mach Till is designed and built for large operations with thousands of acres to cover in a very short amount of time, saving you time, energy, and money. Our 412 Mach Till is commonly used where the efficiency of a large-frame machine can be fully utilized on large parcels of land, where minimizing trips across the field is important. The low-maintenance design of the Mach Till minimizes down time and keeps it rolling through the field.
Shopping Tools
Mach Till 412 Features & Benefits
KEY BENEFITS
- Independently mounted discs have 11½” of clearance to enable discs to clear rocks and other obstacles while following land contours
- Four robust rubber spring elements pre-load the disc arms and keep discs firmly engaged with the soil
- Heavy-built frame provides the weight necessary for working in all soil conditions and is supported by four high-flotation tires
- Consistent working depth is maintained by distributing the frame weight wing-to-wing by the pressure compensated hydraulic weight distribution system
- The full width rubber furrow roller provides optimum, non-compacting soil and residue firming in various soil conditions
- Both the concave smooth and double-V discs are shallow-faced to provide an aggressive cutting edge while eliminating soil compaction layers
- Discs are spaced 10″ apart to enhance residue flow and eliminate plugging
- Maintenance-free double-sealed bearings, carbide roller scrapers, composite bushings, and oversized pins throughout provide many acres of low maintenance operation
- Tills an average of 50 acres per hour at 10 mph using a 620+ HP tractor operating at 80% field efficiency
FEATURE & OPTIONS:
- Category 5 articulating hitch
- Tungsten carbide scrapers
- Hydraulic weight distribution
- 3-Section heavy built frame
- OTICO furrow rollers
- Independent disc arms
- Mechanical depth control
- Hydraulic jack
- Transport width of 16′-0″
- 20″ or 22″ smooth and double-V discs
Mach Till 412 Specs & Compare
| MODEL | 412 |
| WIDTH | |
| Width | 41' |
| Transport width at tires | 13'-6" |
| Transport width (high position) | 16'-0" |
| Transport width (low position) | 17'-8" |
| LENGTH | |
| Transport length | 27'-6" |
| Field length | 33'-0" |
| HEIGHT | |
| Transport height | --- |
| Transport height (low c/w rubber roller) | 13'-6" |
| Transport Height (High c/w rubber roller) | 14'-0" |
| SPECIFICATIONS | |
| Weight | |
| Weight (c/w rubber roller, scraper & 20" discs) | 37,800 lbs |
| Hitch weight | 10,500 lbs |
| DISCS | |
| Number of discs @ 5" spacing overall | 98 |
| Disc diameter | 20" or 22" |
| Disc arm mounting | Rubber torsion - 4 elements per arm |
| Disc arm angle | 17° rear, 14° front |
| Disc spacing | 5" Spacing (10" per row) |
| TIRES | |
| Tire size - center (high flotation) | 750/45R22.5 |
| Tire size - wing | 600/50R22.5 |
| REQUIREMENTS | |
| Engine HP | 12 to 15 HP per foot¹ |
| Hydraulics - at 2,500 psi | 18 to 20 gmp |
¹ Requirements may vary due to terrain, depth, speed, season and field conditions