HPH4242 246.53 Cu. Ft. Struck Per ASAE S324.2 Hydra-Push

  • Center Drive System
  • Solid Virgin Grade Poly Floor & Sides
  • Channel Floor Supports Spaced at 9½” for Superior Strength
  • Easily Removable Beater Assembly
  • Get a Quote Value Your Trade Request Brochure
  • Send to a Friend
  • Payment Calculator

    • Get information on the HPH4242 425-Bushel

    Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

    Request Brochure

    Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

    Send your friend information on the HPH4242 425-Bushel

    Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

    Requesting Trade In on HPH4242 425-Bushel

    Contact Information
    Equipment Interested In
    Trade Information

    Request A Demo

    Fields with asterisks* are required.

    Loan Calculator

    Use the Loan Calculator to help you determine the financing and payment options that are best for you.

    Amount Financed ($)
    Interest Rate (%)
    Loan Term in Months
    Monthly Payment Calculated

    **The accuracy of this calculator and its applicability to your circumstances is not guaranteed. You should obtain personal advice from qualified professionals. This information is provided for illustrative purposes only and does not constitute an application. This notice does not guarantee loan approval, nor is it an offer or commitment to make a loan to you on the above terms.

Shopping Tools
Contact Salesman
Request Demo
Apply for Financing

HPH4242 425-Bushel Features & Benefits

  • All horizontal beater hydraulic push models use solid virgin grade poly with UV inhibitor for the floor and sides, allowing less friction.
  • The hydraulic endgate has two cylinders with ⅜″ hose and pipe for faster operation in cold weather.
  • Heavy-duty rectangular tubing is used for the pole to ensure strength and long life.
  • Structural channel floor supports are spaced 9 ½″ apart are used for maximum floor strength.
  • Driveline protection is provided by a constant velocity PTO and straight shaft under the spreader connect to the rear mount angle gearbox, over to the beater drive sprocket and then to the beater assembly.
  • The hydraulic push-off system on all models features two hydraulic cylinders that sequence to reduce push-off forces for fast unloading of material.
  • Beater blades are replaceable.
  • Beater assembly is removable for stockpiling manure.
  • Removal of the beater assembly is done by simply removing the mounting bolts and removing the drive chain to the beater assembly.
  • Choice of bullnose or clevis hitch
  • Poly bump rails
  • LED highway lighting

HPH4242 425-Bushel Specs & Compare

MODELHPH4242
Capacity 
Capacity - Old Rating425 bu
Capacity - Cu. Ft Struck Level Per ASAE S324.2246.53
Capacity Cu. Ft. Heaped Per ASAE S324.2374.41
Height 
Side Loading Height61 ¼″ (61.3 cm)
2nd Beater Height74 ¾" (190 cm)
Vertical Beater Height-
Height - Top of Hyd. Endgate65″ (165 cm)
Height at Top of Pusher76″ (193 cm)
Height - Top of Screen-
Dimensions 
Inside Width72″ (183 cm)
Inside Length15′ (4.6 m)
Inside Depth34″ (86 cm)
Overall Width w/Tires10′ 2″ (310 cm)
Overall Length28′ (8.5 m)
Construction 
Standard Number of Beaters2
Horizontal Beater Diameter/Lower29″ (71 cm)
Horizontal Beater Diameter/Upper20″ (51 cm)
Vertical Beater Diameter-
Replaceable Beater PaddlesYes
Removeable Beater AssemblyYes
Hub8 Bolt
Hitch ChoicesClevis or Bullnose
Tire Choices425 x 22.5, 19L x 16.1 10 Ply, or 550/45 x 22.5
Hydraulic EndgateStandard
Poly Side RailsStandard
PTO Choices1 ⅜" or 1 ¾" 1000 RPM PTO w/Overrunning Clutch
Hydraulic 
Hydraulic Push Cylinder Diameter3 ½″
Weight w/Tires 
Weight w/Tires7,000 lbs.
Standard 
Rear Hydraulic EndgateStandard