After Hours Emergency Parts:
256-998-2806
After Hours Emergency Service:
256-777-7564
After Hours Emergency:
270-484-8299
H&S S3127 270-Bushel
S3127 146.35 Cu. Ft. Struck Per ASAE S324.2 Heavy-Duty
- Heavy 5" Channel Iron Frame
- Polybonded Floor
- Enclosed 2-Speed Gearbox w/Beater Shut-off
- Hydraulic Endgate
Shopping Tools
S3127 270-Bushel Features & Benefits
- The heavy-duty series of H&S manure spreaders feature a massive unitized welded frame with heavy floor supports, side stakes, and wrap-around steel front corners.
- Strong rear main beater side panels are slanted for clearance and wider spread and then welded to the strong 5″ U-channel side members. Compares with any on the market.
- The side flares on all H&S heavy-duty manure spreaders are made of 10-gauge g210 culvert grade galvanized steel.
- Sides, front panel, and both sides of the rear hydraulic endgate use fiberglass reinforced plywood to provide for easy cleaning and minimal freeze-up.
- The plastic-coated plywood floor allows for considerably less torque to move a heavy load.
- The drive utilizes the patented H&S two-speed gearbox. Shifting is all done in the enclosed two speed/beater shutoff gearbox.
- The 29″ diameter beater has two styles of replaceable beater paddles. Half of the 14 beater paddles are blunt for widespread, and the other half are a sharp ripper-type for cutting and shredding. Beater-side wiper blades are also standard equipment.
- The hydraulic endgate features a single cylinder with the hydraulic lines running through a 3″ x 3″ tube under the floor for protection. The upright position of the hydraulic cylinder stroke allows the gate to lift with the least strain at pivot points.
- Special cast steel alloy apron idler slides are used instead of idler sprockets, making for years of dependable service.
- Adjustment for the main apron is easily made by simply loosening the two side bolts and drawing up the long bolt.
- PTO Apron Low Speed/540 RPMs: 4′ 9″ per minute.
- PTO Apron High Speed/540 RPMs: 8′ 9″ per minute
- A front splash guard is standard equipment.
- Greaseable bearings
S3127 270-Bushel Specs & Compare
| MODEL | S3127 |
| Capacity | |
| Capacity - Old Rating | 270 bu |
| Capacity Cu. Ft. Struck Level Per ASAE S324.2 | 146.35 |
| Capacity Cu. Ft. Heaped Per ASAE S324.2 | 252.46 |
| Dimensions | |
| Top of Flare Width | 68″ (173 cm) |
| Inside Width | 60″ (152 cm) |
| Inside Length | 13' 4" (4.06 m) |
| Inside Depth | 28 ⅜″ (72 cm) |
| Overall Width w/Standard Tires | 94 ½″ (240 cm) |
| Overall Length | 20′ 5 ½″ (6.3 m) |
| Overall Loading Height-Top Of Side | 51 ½″ (131 cm) |
| Overall Height w/Hyd. Endgate | 55″ (139.7 cm) |
| Construction | |
| Diameter Of Beater | 29″ (74 cm) |
| Main Apron Chain | T-Rod |
| Spindle Size | 2 ½″ (6 cm) |
| Standard Tire Size | 295 × 22.5 Recap |
| Weight w/Tires | |
| Weight w/Tires | 3,230 lbs. (1,495 kg) |
| Standard | |
| Rear Hydraulic Endgate | Standard |
| PTO Speed | 540 |
| Jack | Standard |
| Drive | 2-Speed |
| Front Splash Panel | Standard |
| Hyd. Cyl On Hyd. Endgate | 1 - Standard | 2 - Optional |
| Options | |
| Upper Beater | Optional |