Case IH TD103
TD103
The Case IH TD103 pull-type disc mower features a smooth ride, clean cut, superior trailing ability and narrow transport width, plus easy tractor hookup using a simple clevis hitch.
Shopping Tools
TD103 Features & Benefits
Durability at Every Degree
80-Degrees Constant Velocity Joint
- Overload protection is standard
- Primary PTO uses an 80-degree constant velocity joint at the tractor end to permit tight turns, reduce noise and extend service life
- Standard tractor tire bumpers protect PTO driveline and tractor tires
Tilt Adjustments
- Tilt is adjustable from 2–10 degrees using a mechanical turnbuckle
TD103 Specs & Compare
| Number Of Discs | 8 |
| Position Relative To Tractor | Trailing, side-pull |
| Cutting Width ft-in | 10ft 4in |
| Swath Width ft-in | 7ft 11in |
| Min Cutting Height in | 0.95 |
| Max Cutting Height in | 3.2 |
| Mowing Arc From Horizontal | Trailing wheels follow ground |
| Knives Per Disc | 2 |
| Disc Speed rpm | 2835 |
| Drive Between Discs | Bevel gears in sealed modules |
| Required Tractor Power hp | 60 |
| PTO Rated Speed rpm | 540 |
| Hitch Category | Pin to drawbar |
| Hydraulic Circuits Required | 1x SA; 1x DA |
| Transport Width ft-in | 10ft 10in |
| Transport Length ft-in | 15ft 8in |
| Transport Height ft-in | 5ft 2in |
| Weight lb | 2610 |
| Trailing Tire Size | 27x9.5-15, 6PR |