After Hours Emergency Parts:
256-998-2806
After Hours Emergency Service:
256-777-7564
After Hours Emergency:
270-484-8299
Vermeer CC155 Concrete Cutter
- The Vermeer concrete cutter is a great choice for patch work and joint repair on interstates, streets and highways
- With the sustained torque output of its Tier 4 Final (Stage IV) 156 hp (116 kW) John Deere® engine and SmartTEC performance software, the CC155 is a smart choice for road construction, interstate and highway repair, airport lighting projects and demolition work
- Cutting streets for utility installation or patch work is no problem for the Vermeer CC155 concrete cutter. Its ground speed and compact design will help you get your project done efficiently while minimizing lane closures
Shopping Tools
CC155 Concrete Cutter Features & Benefits
Advanced technology for improved machine efficiency
SmartTEC performance monitoring assists operators with adjustments to machine controls to help improve efficiency and tracks the operational performance of the machine on a consistent platform across all machine models.
Limit lane closures with a compact design
The compact design of the CC155 allows this machine to get the job done effectively and efficiently in metropolitan areas and tight roadways while limiting a lane closure.
Unique design allows for more powerful precision
The geometric design of the cutter wheel allows the cut to come from the center of the machine to give a more precise and powerful cut.
CC155 Concrete Cutter Specs & Compare
| GENERAL DIMENSIONS AND WEIGHTS | |
| Weight | 26600 lbs |
| Length | 165 in |
| Height | 120 in |
| Width | 96 in |
| Wheel Base (Centerline of Axles) | 97 in |
| Ground Clearance | 5 in |
| Tread Width | 79 in |
| Water Tank Capacity | 200 gal |
| Weight (Tanks Empty) | 24800 lbs |
| ENGINE | |
| Make and Model | John Deere 4045 |
| Gross Horsepower | 156 hp |
| Fuel Tank Capacity | 88 gal |
| Operating Range | 10.5 hours |
| Number of Cylinders | 4 |
| Cooling Medium | Liquid |
| Air Cleaner | Dry type exhaust aspirated |
| Electrical System | 24 volt DC |
| AUXILIARY HYDRAULIC SYSTEM | |
| Oil Tank Capacity | 74 gal |
| Oil Type | Vermeer HyPower 68 or Vermeer HyPower 100 |
| GROUND DRIVE | |
| Ground Drive Motors | Dual-path hydrostatic with dual series flow to four low speed high torque motors |
| Travel Speed | 461 ft/min |
| System Pressure | 5000 psi |
| Brakes (Park) | Spring-applied, hydraulic release |
| Tire size | 32.3 x 16.5 - 12 |
| Transport Speed Maximum (High) | 971 ft/min |
| STEERING | |
| Type | Hydraulic Automotive |
| Steering Ratio | 4 turns lock to lock |
| Turning Radius | 216 in |
| CUTTER WHEEL | |
| Wheel Diameter | 84 in |
| Cutting Width | 4.8 in |
| Cutting Width - Option Two | 5 in |
| Cutting Width - Option Three | 6.5 in |
| Cutting Width - Option Four | 9 in |
| Cutting Width - Option Five | 10 in |
| Maximum Cutting Depth | 31 " (78.74 cm) |
| Cutting Teeth Type | Free-rotating, carbide tipped |
| Cutter Wheel Drive | Hydrostatic, one pump, one low speed high torque motor |
| Rock Cutter Segments | Bolt-on replaceable x 10 |
| Wheel Thickness | 2 in |
| Rock Cutter Teeth Quantity 5 " (12.7 cm) Cut | 110 |
| Rock Cutter Teeth Quantity 6.5 " (16.51 cm) Cut | 130 |
| Rock Cutter Teeth Quantity 9 " (22.86 cm) Cut | 150 |
| Rock Cutter Teeth Quantity 10 " (25.4 cm) Cut | 110 |
| CUTTER WHEEL DRIVE | |
| Cutter Tip Speed (Low Gear) | 1056 ft/min |
| Cutter Tip Speed (High Gear) | 2113 ft/min |
| OPTIONS | |
| Foam Filled Tires | Standard |
| Asphalt Mill | 30" (76.2 cm) wide x 13" (33 cm) deep or 30" wide (76.2 cm) x 20" (50.8 cm) deep |