• Packed with innovation and power
  • Minimize labor cost on the job
  • Offering proven cutting performance
  • Get a Quote Value Your Trade Request Brochure
  • Send to a Friend
  • Payment Calculator

    • Get information on the TG7000 Tub Grinder

    Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

    Request Brochure

    Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

    Send your friend information on the TG7000 Tub Grinder

    Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

    Requesting Trade In on TG7000 Tub Grinder

    Contact Information
    Equipment Interested In
    Trade Information

    Request A Demo

    Fields with asterisks* are required.

    Loan Calculator

    Use the Loan Calculator to help you determine the financing and payment options that are best for you.

    Amount Financed ($)
    Interest Rate (%)
    Loan Term in Months
    Monthly Payment Calculated

    **The accuracy of this calculator and its applicability to your circumstances is not guaranteed. You should obtain personal advice from qualified professionals. This information is provided for illustrative purposes only and does not constitute an application. This notice does not guarantee loan approval, nor is it an offer or commitment to make a loan to you on the above terms.

Shopping Tools
Contact Salesman
Request Demo
Apply for Financing

TG7000 Tub Grinder Features & Benefits

Safety

The patented Thrown Object Restraint System (TORS) reduces the amount and distance of thrown material debris and has a smooth underside for better material flow. 

The optional Damage Defense system reduces the likelihood of certain metal contaminants from entering the hammermill by reacting to the initial contact with the contaminant and reversing the feed system to allow removal of the contaminant.

Powerful cutting performance

A C27 Tier 4F engine provides 950 hp (708 kW) of power to meet your jobsite demands. 

The patented Series III duplex drum offers proven cutting performance, and reversible hammers and tips nearly double the wear life of single-sided designs and simplify daily maintenance.

Convenient control

Monitor real-time performance and data via the on-machine display or remote control.

Your access to MORE: VermeerOne™

VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real time data to make smarter decisions, and help maximize productivity and profitability.

TG7000 Tub Grinder Specs & Compare

GENERAL DIMENSIONS AND WEIGHTS - NON LOADER 
Maximum Length - Transport45.6 ft
Maximum Length - Conveyor Unfolded62.6 ft
Maximum Width (Transport)11.9 ft
Maximum Height (Transport)162 in
Weight - Engine Option One78000 lbs
Weight - Engine Option Two78000 lbs
Tongue Weight - Engine Option One28800 lbs
Tongue Weight - Engine Option Two28000 lbs
Axle Weight50000 lbs
GENERAL DIMENSIONS AND WEIGHTS - LOADER 
Maximum Length - Transport45.9 ft
Maximum Length - Conveyor Unfolded62.6 ft
Maximum Reach of Loader29.5 ft
Maximum Width (Transport)11.9 ft
Maximum Height (Transport)162 in
Maximum Height - Cab in Operating Position18.8 ft
Weight - Engine Option One90000 lbs
Weight - Engine Option Two90000 lbs
Tongue Weight - Engine Option One34500 lbs
Tongue Weight - Engine Option Two34500 lbs
Axle Weight54500 lbs
Axle Weight - Option Two54500 lbs
Sound PowerSound power (LwA) = 118.4 dB(A) Equivalent continuous A-weighted sound pressure at operator's ear (Laeq) = 97.2 dB(A) - main control station Equivalent continuous A-weighted sound pressure at operator's ear (Laeq) = 74.4 dB(A) - loader cab
Sound Power - Engine Option TwodB(A) - Loader CabSound Power (LwA) = 120.0 dB(A) Equivalent Continuous A-Weighted Sound Pressure at Operator's Ear (Laeq) = 100.0 dB(A) - Main Control Station Equivalent Continuous A-Weighted Sound Pressure at Operator's Ear (Laeq) = 77.0
ENGINE - OPTION ONE 
Make and ModelC27 Tier 4 Final
Number of Cylinders1200%
Gross Horsepower (Maximum)950 hp
Torque (Max)3212 ft-lb
Fuel Tank Capacity500 gal
Max Fuel Consumption47.5 gph
Fuel TypeUltra Low Sulfur Diesel
Air CleanerPleated Primary (4) and Secondary (4) with precleaners (2) and electric restriction indicator (2)
Oil FilterSpin-on (2)
Recommended OilCAT DEO-ULS, API CJ-4, API CK-4, or ECF-3 10W-30 / 15W-40
Oil Volume with Filter72 qt
Cooling MediumLiquid
Coolant Capacity (Engine and Radiator)42 gal
Air to Boil Temperature142 deg
Alternator24 Volt, 100 Amp
Fan60" (152.4 cm) Dia, Fixed Pitch, Hyd Reverse Option
Clutch TypeHydraulic Operated Wet Clutch
Clutch EngagementPush button
Sound PowerSound power (LwA) = 118.4 dB(A) Equivalent continuous A-weighted sound pressure at operator's ear (Laeq) = 97.2 dB(A) - main control station Equivalent continuous A-weighted sound pressure at operator's ear (Laeq) = 74.4 dB(A) - loader cab
ENGINE - OPTION TWO 
Make and ModelCaterpillar C27 Tier 2/Stage II
Number of Cylinders12
Gross Horsepower (Maximum)950 hp
Torque (Max)3202 ft-lb
Fuel Tank Capacity500 gal
Max Fuel Consumption45.7 gph
Fuel TypeUltra low sulfur diesel or low sulfur diesel
Air CleanerPleated Primary (4) and Secondary (4) with precleaners (2) and electric restriction indicator (2)
Oil FilterSpin-on (2)
Recommended Oil15W40
Oil Volume with Filter76 qt
Cooling MediumLiquid
Coolant Capacity (Engine and Radiator)34 gal
Air to Boil Temperature122 deg
Alternator24 Volt, 75 Amp
Fan60" (152.4 cm) diameter, fixed pitch, hydraulic reverse
Clutch TypeHydraulic Operated Wet Clutch
Clutch EngagementPush Button
Sound PowerSound Power (LwA) = 120.0 dB(A) Equivalent Continuous A-Weighted Sound Pressure at Operator's Ear (Laeq) = 100.0 dB(A) - Main Control Station Equivalent Continuous A-Weighted Sound Pressure at Operator's Ear (Laeq) = 77.0 dB(A) - Loader Cab
FEED SYSTEM 
Tub Table Thickness.5 in
Tub Table TypeT1 Steel
Table Tilt Degrees92 deg
Millbox Opening27" x 69" (68.9 cm x 175.3 cm)
Inside Diameter of Tub10 ft
Inside Flare Diameter - At Base of Tub10.3 ft
Inside Flare Diameter - At Tub Opening13 ft
Depth of Tub4.7 ft
Tub Capacity15 cu yd
Wall Thickness.3 in
Wall TypeT1 Steel
Loading Height11.3 ft
Drive TypeClosed loop hydraulic, continuous sprocket
Drive ChainANSI #160 roller chain
Drive TensionerHydraulic
Drive MotorHydraulic, low speed/high torque (qty 2)
Tub Roller Quantity8 carrier, 8 Guide (16 total)
Tub Speed8 rpm
Tub Agitators4
SAFETY SYSTEM 
Thrown Object Restraint SystemStandard
Tub Cover DescriptionConical Cover with Hydraulic Swing Away
Tub Cover PositionsTransport and operate with hydraulic lock
Rotor DeflectorStandard
Wear Liner Thickness.6 in
Wear Liner TypeAbrasion-resistant plate (Astralloy 4800)
Falling Object Protection at Control StationOverhead and side protection
DUPLEX DRUM 
Drum Diameter22.5 in
Tip Diameter31 in
Drum Cutting Width65.3 in
Drum Skin Thickness1.5 in
Drum Speed1340 rpm
Tip Speed10319 rpm
Bearing TypeDouble row, spherical roller
Bearing - Inner Race Diameter5.5 in
Bearing - Dynamic Capacity228000 lbs
Number of Hammers10
Number of Cutters20
Cutter Block TypesMultiple styles, 2 bolt retension with 7/8" (22.2 mm) UNC fasteners
Center Retention Pin Dimensions2" (5.1 cm)
Number of Wipers4
SCREENS 
Screen Weight350-500 lb each
Screen Dimensions72.4" x 35.8" x 10.3" (183.9 cm x 91 cm 21.2 cm)
Screen TypeAR400, reversible (qty 2)
Breaker Bar TypeT1 steel, replaceable
Breaker Bar Dimensions2.5" x 4" x 77" (6.4 cm x 10.2 cm x 195.6 cm)
Number of Sides4 useable edges
Screen Area4069 sq in
Distance - Screen to Millbox Wall21.4 in
DRIVELINE - ENGINE OPTION ONE 
Drive ShaftCustom Spicer
U - JointsPermanently Lubricated 10C (qty 2)
DISCHARGE SYSTEM - SINGLE BELT DESIGN 
Length24 ft
Width48 in
Belt Design330# with V-cleat
SpliceFlexco R2 stainless steel
Return Roller Quantity5 standard and 1 vibrating roller
Idler Roller Diameter12 in
Idler Roller Bearing1 15/16" (4.9 cm) f-bolt flange
Standard Drive Roller Diameter13.8 in
Magnetic Drive Roller Diameter13.8 in
Drive MotorGeroler
Belt Speed860 ft/min
Load HeightMinimum = 11.9 ft, Maximum = 17 ft at 35 deg
HYDRAULIC SYSTEM 
Tank capacity100 gal
Recommended OilHy-Power 68
Filtration MethodIn-tank return filters (qty 2)
Number of Coolers1
IMPLEMENT HYDRAULICS 
ComponentsConveyor with auxiliary valve
System TypeLoad sense, pressure compensated
Pump TypeAxial piston, variable displacement
Pump Flow at Maximum RPM30.2 gpm
System relief pressure3000 psi
TUB DRIVE HYDRAULICS 
System TypeClosed loop
Pump TypeAxial piston, variable displacment
Pump Flow at Maximum RPM33.8 gpm
System relief pressure3000 psi
Motor SeriesGeroler, Heavy-Duty High-Torque (Qty 2)
FAN DRIVE HYDRAULICS 
System TypeClosed Loop
Pump TypeAxial Piston, Varible Displacement
Pump Flow at Maximum RPM37.5 gpm
System relief pressure5000 psi
Motor SeriesAxial Piston, Fixed Displacement
Fan Series - FWD/REV1150/500
CLUTCH HYDRAULICS 
Tank capacity25 gal
Recommended OilVMF Gold
Filtration MethodSpin on High Pressure
Number of Coolers1
System TypeOpen loop
Pump TypeGear
Pump Flow at Maximum RPM10.7 gpm
System relief pressure250 psi
LOADER HYDRAULICS 
System TypeLoad Sense, Pressure Compensated
Pump TypeAxial Piston, Varible Displacement
Pump Flow at Maximum RPM53.1 gpm
System relief pressure3615 psi
ELECTRICAL SYSTEM 
System Voltage24 Volt
BatteryGroup 8-D, 1400 CCA (2)
System ProtectionFused
CONTROL STATION 
Display TypeLCD Multi-Function
Engine InformationOperational, Diagnostic and System Parameters
Machine InformationOperational, Diagnostic and System Parameters
Operational FaultsSAE J1939 Diagnostic Codes
SwitchesCAN network, sealed membrane
RADIO REMOTE CONTROL 
Display TypeLCD multifunction
Engine InformationOperational, diagnostic and system parameters
Machine InformationOperational, diagnostic and system parameters
Operational FaultsSAE J1939 diagnostic codes
SwitchesSealed membrane
Operating Range300' (91.4 m)
Battery TypeAA (qty 6)
Channel Setting50 channels
LOADER CAB 
Display TypeLCD multifunction
Engine InformationOperational, diagnostic and system parameters
Machine InformationOperational, diagnostic and system parameters
Operational FaultsSAE J1939 diagnostic codes
Gauges0-5000 psi (0-344.7 bar) loader system pressure (1)
SwitchesCAN Network, sealed membrane
CHASSIS 
Frame DescriptionContinuous I-beam
Hitch TypeWeld-In king pin - 2" (5.1 cm)
Fender DescriptionBolt On, 3/16" Formed Steel
Brake TypeAir actuated with spring applied park brake
Trailer Light Type12 Volt Incandescent
AXLE/SUSPENSION 
Axle TypeTri-Axle Spring
Tires - Option One425/65R22.5 Super Singles
Wheels - Option One22.5" x 8.25" Hub Piloted Aluminum
Ground Clearance - Option One13.5 in
Tires - Option Two255/70R22.5 duals
Wheels - Option Two22.5" x 8.25" Hub Piloted Steel
Ground Clearance - Option Two10 in
AXLE/SUSPENSION - OPTION TWO 
Axle TypeTri-Axle Air Ride
Capacity20000 lbs
Tires - Option One425/65R22.5 Super Singles
Wheels - Option One22.5" x 12.25" Hub Piloted Aluminum
Ground Clearance - Option One13.5 in
Tires - Option Two255/70R22.5 duals
Wheels - Option Two22.5" x 8.25" Hub Piloted Steel
Ground Clearance - Option Two10 in
LOADER 
Loader Reach29.5 ft
Pedestal/Cab Rotation370 deg
Loader Lift Capacity at Full Reach4000 lbs
Loader Lift Capacity at 10 ' (3.05 m)12000 lbs
Grapple TypeMultiple tine
Grapple Rotation360 deg
Grapple Weight1450 lbs
Loader ControlsElectric-over-hydraulic CAN-based system
Climate ControlsA/C and heat
RadioAM/FM/WB/AUX Sirius satellite radio ready with two 4-in (10.2-cm) speakers
Window Type3/8" (.95 cm) polycarbonate
Front Intrusion Guard5/8" (1.6 cm) diaemter reinforced wire mesh
OPTIONAL AIR COMPRESSOR 
Air Compressor BrandMi-T-M
Engine11.7 hp (8.7 kW) Honda
Maximum Pressure175 psi
Maximum Air Flow29 cfm
Tank capacity30 gal
OTHER OPTIONS - TUB GRINDER 
ScreensOptional
Special Tools GroupOptional
Special PaintOptional
Extended WarrantyOptional
Preventative MaintenanceOptional