After Hours Emergency Parts:
256-998-2806
After Hours Emergency Service:
256-777-7564
After Hours Emergency:
270-484-8299
Vermeer D1000x900 HDD
- Muscle for the biggest of drilling jobs
- Run full torque and full rotary rpm simultaneously
- Rugged design for real-world rigors
Shopping Tools
D1000x900 HDD Features & Benefits
Big power for the biggest jobs
High-torque, low-speed Hagglunds® hydraulic motors efficiently powers rotary and carriage drives so you can run full torque and full rotary rpm simultaneously.
Muscles through difficult ground formations with higher torque than other predecessors.
Designed to perform
Floating vise helps prevent rod wrap or windup because it allows the breakout system to clamp the full rod upsets during breakout of the lower and upper joints.
Thrust box bearing-pack assembly reduces stress on the motor by absorbing the axial load caused by thrust and pullback.
Your access to MORE: VermeerOne™
VermeerOne™ Platform isn’t just a tool or platform. It’s an experience — one designed to simplify equipment management, empower users with real-time data to make smarter decisions, and help maximize productivity and profitability.
D1000x900 HDD Specs & Compare
| DRILL RACK | |
| Length (Minimum Transport) | 50.5 ft |
| Width | 8.5 ft |
| Height (Minimum Transport) | 11.5 ft |
| Weight | 101000 lbs |
| Suspension | Triple axle with air ride suspension |
| Front Base Anchor Length | 20 ft |
| Front Base Anchor Width | 6 ft |
| Front Base Anchor Height | 24 in |
| Front Flat Anchor Length | 9.5 ft |
| Front Flat Anchor Width | 5 ft |
| Front Flat Anchor Height | 8 in |
| Rear Base Anchor Length | 16 ft |
| Rear Base Anchor Width | 7.8 ft |
| Rear Base Anchor Height | 8 in |
| Number of Rear Legs | 2 |
| Drill Rack Angle | 8 degrees to 12 degrees |
| DRILLER CABIN | |
| Length | 10 ft |
| Width | 8.5 ft |
| Height | 9 ft |
| Weight | 6000 lbs |
| Heat and Air Conditioning | In-wall combination unit |
| POWER PACK | |
| Length | 22.4 ft |
| Width | 8 ft |
| Height | 10.3 ft |
| Weight | 38000 lbs |
| Make and Model | (1) CAT C-27 |
| Fuel Type | Diesel |
| Fuel Capacity | 500 gal |
| Hydraulic Tank Capacity | 720 gal |
| Maximum Engine RPM | 2000 rpm |
| Gross Horsepower | 800 hp |
| EPA Certification Family | Tier 2 (EU Stage II) |
| POWER PACK OPTION TWO | |
| Length | 32.2 ft |
| Width | 8 ft |
| Height | 10.3 ft |
| Weight | 57260 lbs |
| Make and Model | (2) CAT C-18 |
| Fuel Type | Diesel |
| Fuel Capacity | 1000 gal |
| Hydraulic Tank Capacity | 720 gal |
| Maximum Engine RPM | 2000 rpm |
| Gross Horsepower | 1200 hp |
| EPA Certification Family | Tier 3 (EU Stage II) |
| POWER PACK OPTION THREE | |
| Length | 32.2 ft |
| Width | 8 ft |
| Height | 10.3 ft |
| Weight | 57260 lbs |
| Make and Model | (2) CAT C-27 |
| Fuel Type | Diesel |
| Fuel Capacity | 1000 gal |
| Hydraulic Tank Capacity | 720 gal |
| Maximum Engine RPM | 2000 rpm |
| Gross Horsepower | 1600 hp |
| EPA Certification Family | Tier 2 (EU Stage II) |
| OPERATIONAL | |
| Thrust | 1000000 lbs |
| Pullback | 1000000 lbs |
| Maximum Spindle Torque | 102500 ft-lb |
| Maximum Spindle Torque (Low at Maximum Engine RPM) | 102500 ft-lb |
| Maximum Spindle Speed at Maximum Engine RPM (with PS800) | 36 rpm |
| Maximum Spindle Speed at Maximum Engine RPM (with PS1200/PS1600) | 54 rpm |
| Maximum Carriage Speed at Maximum Engine RPM | 77 ft/min |
| Number of Rotation Motors | 1 |
| Number of Drive Motors | 4 |
| Mud Swivel | 3 in |
| LOWER BREAKOUT VISE | |
| Breakout Force | 253000 ft-lb |
| Configuration | 3-jaw clamp, 8 " (20.3 cm) |
| Weight | 3800 lbs |
| Travel | 6 ft |
| Inside Diameter | 9.8 in |
| UPPER BREAKOUT VISE | |
| Clamp Force | 250000 ft-lb |
| Configuration | 2-jaw clamp |
| Inside Diameter | 10 in |
| SAFETY | |
| Remote Lockout | Yes |
| Strike Alert | Yes |