• Class-leading jobsite versatility features
  • Complete control at the hands of the operator
  • Spend less time on maintenance and more time being productive
  • Get a Quote Value Your Trade Request Brochure
  • Send to a Friend
  • Payment Calculator

    • Get information on the TR6450 Trommel Screen

    Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

    Request Brochure

    Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

    Send your friend information on the TR6450 Trommel Screen

    Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

    Requesting Trade In on TR6450 Trommel Screen

    Contact Information
    Equipment Interested In
    Trade Information

    Request A Demo

    Fields with asterisks* are required.

    Loan Calculator

    Use the Loan Calculator to help you determine the financing and payment options that are best for you.

    Amount Financed ($)
    Interest Rate (%)
    Loan Term in Months
    Monthly Payment Calculated

    **The accuracy of this calculator and its applicability to your circumstances is not guaranteed. You should obtain personal advice from qualified professionals. This information is provided for illustrative purposes only and does not constitute an application. This notice does not guarantee loan approval, nor is it an offer or commitment to make a loan to you on the above terms.

Shopping Tools
Contact Salesman
Request Demo
Apply for Financing

TR6450 Trommel Screen Features & Benefits

Jobsite efficiency

Tensioning the screens allows for maximum strength with a finer wire gauge, optimizing production through increased open area. In high moisture applications, the use of stainless-steel screens can be very useful.

The optional third product conveyor allows the single drum, TR6450 trommel screen, to produce three unique products in one pass.

Convenient loading

With a hopper height of 9.5 ft (2.9 m), the operator can load material without having to build a ramp to the machine, decreasing loading cycle times.

Advanced controls

The ability to adjust the working trommel from the loader is made possible by the standard full-function remote control, which allows you to adjust screening functions, raise and lower conveyors, pause the hopper, reverse the engine fan and more.

Maintenance-friendly

The hydraulic-driven chain drive system provides positive drum drive and allows the drum to lift off of the cog for service and maintenance.

TR6450 Trommel Screen Specs & Compare

GENERAL DIMENSIONS AND WEIGHTS 
Weight39000 lbs
Hitch Weight5300 lbs
Transport Length39.5 ft
Transport Width119.5 in
Transport Height13.2 ft
Operation Length54.2 ft
Operation width43.3 ft
Operation Height16.7 ft
Capacity180 yd³ (137.6 m³) per hour with 0.5-in (1.3-cm) screens installed and material with moisture less than 40% 
ENGINE - OPTION ONE 
Make and ModelCAT 3.6L Tier 4F (Stage V)
Number of Cylinders4
Engine Rating120 hp (90 kW)
Fuel Tank Capacity50 gal
Fuel Consumption3 gph (11.4 L/hr)
Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles)35 deg
Battery950 CCA
Oil FilterSpin-on
Recommended OilMobil 15W40
Oil Volume with Filter11.2 qt
System Voltage12-V, 120-amp alternator
Air CleanerDual element
Radiator FanSuction
HYDRAULIC SYSTEM 
Tank capacity80 gal
CHASSIS 
Frame DescriptionFour independent hydraulic jacklegs
Axle/SuspensionLeaf spring
Tires - Option One445/50 R22.5
HOPPER AND APRON CONVEYOR 
Hopper Capacity6.5 cu yd
Hopper Bottom Width37.5 in
Apron Conveyor Speed0-15 ft/min
Apron Opening Height45 in
Apron Opening Width37.5 in
Hopper Height9.5 ft (2.9 m) from ground level at operating incline
Hopper Opening11.7 ft x 5.3 ft (3.6 m x 1.6 m)
Apron Conveyor Length12.4 ft
Apron Conveyor Belt Width42 in
Apron Conveyor Rollers5 in (12.7 cm) CEMA "D" x 17
SCREEN DRUM 
Drum Operation0-35.9 gpm (0-135.9 L/min)
Drum Motor35.5 in³ (630 cm³) displacement 
Drum Diameter6.5 ft
Drum Support Description8 polyurethane trunnion wheels on pivoting bogeys 8 in x 4 in (20.3 cm x 10.2 cm) wide
Drum Length20 ft
Thrust Bearing Diameter4 in
Thrust Bearing Face2 in
Drum Speed0-25 rpm
Drum Drive Chain140 extended pin/extended width
Drum Angle Adjustability0-5 deg
Maximum Screen Panels8
SCREEN BRUSHES 
Brush Diameter14 in
Bristle MaterialPolyethylene
Brush Assembly Support(2) 1.25 in (3.2 cm) sealed ball bearings/brush
COLLECTING CONVEYOR 
Conveyor Motor Displacement16.7 cu-in
Collecting Conveyor Length16 ft
Collecting Belt Speed360 ft/min
Conveyor Belt Width36 in
Conveyor Belt Type220 lb (99.8 kg), 2-ply, 2/16-in x 1/16-in (3.2-mm x 1.6-mm)
Head/Tail Pulley Type8-in (20.3-cm) crowned
Head Pulley Bearing1.75-in (4.4-cm) double roller
Rubber FlashingAdjustable corded rubber
Idler Type4 in (10.2 cm) CEMA "B" straight
Tail Pulley Takeup6 in
Self-Cleaning Return Idlers(3) 4-in (10.2-cm) rubber disc
Collecting conveyor framePart of trailer frame
OPTIONAL THIRD PRODUCT CONVEYOR 
Conveyor Motor Displacement14.2 cu-in
Fines Conveyor Length24.5 ft
Fines Belt Speed500 ft/min
Conveyor Belt Width30 in
Conveyor Belt Type220 lb (99.8 kg), 2-ply, 2/16-in x 1/16-in (3.2-mm x 1.6-mm) smooth
Conveyor Belt Stacking Height12.5 ft (3.8 m) (conveyor @ 30 deg)
Head Pulley Type8-in (20.3-cm) crowned
Head Pulley Bearing1.5-in (3.8-cm) pillow block
Troughing Idler Type20 deg CEMA "B" with permanently sealed bearings spaced at 40-in centers
Self-Cleaning Tail Pulley Dimensions8-in (20.3-cm) diameter, 32-in (81.3-cm) wide, crowned wing pully, 1.75-in (4.4-cm) shaft
Head Pulley Takeup8 in
Self-Cleaning Return Idlers(5) 4-in (10.2-cm) diameter
Fines Conveyor FrameEngineered structural frame
FINES CONVEYOR 
Conveyor Motor Displacement14.2 cu-in
Fines Conveyor Length23.5 ft
Fines Belt Speed400 ft/min
Conveyor Belt Width36 in
Conveyor Belt Type220 lb (99.8 kg), 2-ply, 2/16-in x 1/16-in (3.2-mm x 1.6-mm) smooth
Conveyor Belt Stacking Height10.5 ft (3.2 m) (conveyor @ 30 deg)
Head Pulley Type8-in (20.3-cm) crowned
Head Pulley Bearing1.5-in (3.8-cm) pillow block
Troughing Idler Type20 deg CEMA "B" with permanently sealed bearings spaced at 40-in (101.6-cm) centers
Self-Cleaning Tail Pulley Dimensions8-in (20.3-cm) diameter, 38-in (96.5-cm) wide, crowned wing pulley, 1.75-in (4.4-cm) shaft
Head Pulley Takeup8 in
Self-Cleaning Return Idlers(3) 4-in (10.2-cm) diameter
Fines Conveyor FrameEngineered structural frame
OVERS CONVEYOR - OPTION 1 
Overs Conveyor Length19.2 ft
Maximum Variable Overs Belt Speed360 ft/min
Conveyor Belt Size42 in (106.7 cm)
Conveyor Belt Type220 lb (99.8 kg), 2-ply, 2/16-in x 1/16-in (3.2-mm x 1.6-mm) cleated
Conveyor Belt Stacking Height9 ft (2.74 m) (conveyor @ 25 deg)
Head Pulley Type8-in (20.3-cm) crowned
Head Pulley Bearing1.5-in (3.8-cm) pillow block
Self-Cleaning Tail Pulley Dimensions8-in (20.3-cm) diameter, 44-in (111.8-cm) wide, crowned wing pulley, 1.75-in (4.4-cm) shaft
Head Pulley Takeup8 in
Self-Cleaning Return Idlers(2) 4-in (10.2-cm) diameter, (1) 5-in (12.7-cm) "rattle roller"
Overs Conveyor FrameEngineered structural frame
Troughing Idler Type20 degrees CEMA "B" with permanently sealed bearings spaced at 32-in (81.3-cm) centers