• Machine built to minimize jobsite disturbance
  • Complete control allows for increased efficiency when it matters most
  • Spend less time on maintenance and more time being productive
  • Get a Quote Value Your Trade Request Brochure
  • Send to a Friend
  • Payment Calculator

    • Get information on the TR626EM Trommel Screen

    Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

    Request Brochure

    Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

    Send your friend information on the TR626EM Trommel Screen

    Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

    Requesting Trade In on TR626EM Trommel Screen

    Contact Information
    Equipment Interested In
    Trade Information

    Request A Demo

    Fields with asterisks* are required.

    Loan Calculator

    Use the Loan Calculator to help you determine the financing and payment options that are best for you.

    Amount Financed ($)
    Interest Rate (%)
    Loan Term in Months
    Monthly Payment Calculated

    **The accuracy of this calculator and its applicability to your circumstances is not guaranteed. You should obtain personal advice from qualified professionals. This information is provided for illustrative purposes only and does not constitute an application. This notice does not guarantee loan approval, nor is it an offer or commitment to make a loan to you on the above terms.

Shopping Tools
Contact Salesman
Request Demo
Apply for Financing

TR626EM Trommel Screen Features & Benefits

Convenient loading

Forget the loading ramps with the help of the low hopper infeed height of the TR626 trommel screen.

Move material smoothly without bridging, thanks to a tall, wide throat opening.

Safety

Startup delay and alarm systems notify your whole crew when the machine is about to start.

Versatility

Tensioning the screens allows for maximum strength with a finer wire gauge, optimizing production through increased open area. In high moisture applications, the use of stainless-steel screens can be very useful.

The fines conveyor can have straight discharge or ordered with 180-degree radial arc. Both offer adjustable stacking height to reduce material loss and reduced dust in windy condition.

Minimized jobsite disturbance

The machine is powered by two industrial-duty, fully-enclosed and fan-cooled electric motors, a single 150-hp (112-kW) motor powering the hydraulic pump stack and a .75-hp(.6-kW) motor powering the cooling fan for the hydraulic system.

Advanced controls

Can be ordered with a 20-ft or 28-ft (6.1 m or 8.5 m) length, with standard or magnetic head pulley and are fully height adjustable to reduce dust and material loss in windy conditions.

Operators can control the machine through either the Vermeer DP10 display mounted on the control panel, or through a handheld transceiver remote.

TR626EM Trommel Screen Specs & Compare

GENERAL DIMENSIONS AND WEIGHTS 
Weight65000 lbs
Hitch Weight30000 lbs
Transport Length54.5 ft
Transport Width113 in
Transport Height13.5 ft
Operation Length84.4 ft
Operation Width113 in
Operation Height15.9 ft
CapacityApproximately 200 cu yd (152.9 cu m) per hour with 0.5 in (1.3 cm) screens installed and material with moisture less than 40%
MOTOR OPTION ONE 
Make and ModelSiemens
Motor rating150 hp, 1800 rpm, 460 V, 3 phase
System Voltage12 V, 120 amp alternator
HYDRAULIC SYSTEM 
Operation62.9 gmp @ 2800 psi (238.1 L/min @ 172.4 bar [17240 kPa])
Tank capacity200 gal
CHASSIS 
Frame Description4 independent hydraulic jacklegs
Axle/SuspensionLeaf spring
Capacity22500 lbs
Tires - Option One235-75R 17.5H qty. 4
HOPPER AND APRON CONVEYOR 
Hopper Capacity6 cu yd
Hopper Bottom Width48 in
Apron Conveyor Speed0-205 fpm (0-62.5 m/min)
Apron Opening Height34 in
Apron Opening Width43 in
Hopper Height9.5 ft (2.9 m) from ground level at operating incline
Hopper Opening13.2 ft x 5.3 ft (4 m x 1.6 m)
Apron Conveyor Length16 ft
Apron Conveyor Belt Width48 in
Apron Conveyor Rollers4 in (10.2 cm) diameter qty. 14
SCREEN DRUM 
Drum Operation0-42.6 gpm (161.3 L/min)
Drum Motor48.8 cu in (800 cu cm) displacement
Drum Diameter6 ft
Drum Support DescriptionFour steel trunnion rollers 8 in (20.3 cm) diameter, 4 in (10.2 cm) width
Drum Length26 ft
Thrust Bearing Diameter5 in
Thrust Bearing Face2.9 in
Drum Speed0-21.6 rpm
Drum Drive Chain140 WT
Drum Angle Adjustability3-5 deg
Maximum Screen Panels8
SCREEN BRUSHES 
Brush Diameter14 in
Bristle MaterialPolyethylene
Brush Assembly SupportTwo 1.25-in (3.2-cm) sealed ball bearings
COLLECTING CONVEYOR 
Conveyor Motor Displacement32.7 cu-in
Fines Belt Speed405 ft/min
Conveyor Belt Width36 in
Conveyor Belt Type220 lb (99.8 kg), 2-ply, 2/16 in x 1/16 in (4.8 mm x 1.6 mm)220 lb (99.8 kg), 2-ply, 2/16 in x 1/16 in (4.8 mm x 1.6 mm)
Head/Tail Pulley TypeRubber-lagged, 12 in (30.5 cm ) diameter, 38 in (99.65 cm) wide
Head Pulley Bearing2.4 in (6.1 cm) pillow block
Rubber FlashingAdjustable, 0.25 in (6.44 cm) thick, 4 in (10.2 cm)
Idler Type20 degrees CEMA "B" with permanently sealed bearings spaced at 24 in (20.96 cm) centers
Tail Pulley Takeup12 in
Self-Cleaning Return Idlers6, each 4 in (10.2 cm) diameter
Fines Conveyor FramePart of trailer frame
FINES CONVEYOR 
Conveyor Operation15.4 gpm
Conveyor Motor Displacement32.7 cu-in
Fines Conveyor Length72.5 ft
Fines Belt Speed405 ft/min
Conveyor Belt Width36 in
Conveyor Belt Type220 lb (99.8 kg), 2-ply, 2/16 in x 1/16 in (4.8 mm x 1.6 mm)
Conveyor Belt Stacking Height16.6 ft (5.1 m) with drum at 4 deg
Head Pulley TypeRubber lagged, 12 in (30.5 cm) diameter, 38 in (99.65 cm) wide
Head Pulley Bearing2.4 in (6.1 cm) pillow block
Rubber FlashingAdjustable, 0.25 in (0.64 cm) thick, 4 in (10.16 cm)
Troughing Idler Type20 degrees CEMA "B" with permanently sealed bearings spaced at 24 in (60.96 cm) centers
Self-Cleaning Tail Pulley Dimensions10 in (25.4 cm) diameter, 38 in (96.5 cm) wide with 2.4 in (6.1 cm) shaft
Tail Pulley Takeup12 in
Self-Cleaning Return Idlers11, each 4 in (10.2 cm) diameter
Fines Conveyor Frame4 in x 8 in (10.2 cm x 20.3 cm) structural steel tubing
FINES CONVEYOR OPTION-RADIAL 
Conveyor Motor Displacement15.9 cu-in
Fines Conveyor Length30.5 ft
Fines Belt Speed705 ft/min
Conveyor Belt Type150 lb (99.8 kg), 2-ply, 1/32 in x 1/32 in (0.8 mm x 0.8 mm), vulcanized
Head/Tail Pulley TypeRubber lagged, crowned, 9.75 in (24.8 cm) diameter, 32 in (81.3 cm) wide
Head Pulley Bearing1.94 in (4.9 cm) pillow block
Rubber FlashingAdjustable, 0.25 in (6.4 mm) thick, 4 in (10.2 cm)
Idler Type30 degrees CEMA "B" with permanently sealed bearings spaced at 41 in (104 cm) centers
Self-Cleaning Return Idlers4, each 4 in (10.2 cm) diameter
Fines Conveyor Frame2 in x 8 in (5.1 cm x 20.3 cm) structural steel building
OVERS CONVEYOR - OPTION 1 
Overs Conveyor Length20 ft
Maximum Variable Overs Belt Speed290 ft/min
Conveyor Belt Size48 in (121.9 cm) wide with raised cleat
Conveyor Belt Type220 lb (99.8 kg), 2-ply, 2/16 in x 1/16 in (4.8 mm x 1.6 mm)
Conveyor Belt Stacking Height3 ft (0.9 m) x 10 ft (3.1 m)
Head Pulley TypeRubber lagged, 12 in (30.5 cm) diameter, 51 in (99.65 cm) wide
Head Pulley Bearing2.4 in (6.1 cm) pillow block
Self-Cleaning Tail Pulley Dimensions10 in (25.4 cm) diameter, 51 in (129.5 cm) wide with 2.4 in (6.1 cm) shaft
Tail Pulley Takeup12 in
Solid Return Idler Size4-in diameter
Overs Conveyor Frame4 in x 8 in (10.2 cm x 20.3 cm) structural steel tubing
OVERS CONVEYOR - OPTION 2 
Overs Conveyor Length28 ft
Maximum Variable Overs Belt Speed290 ft/min
Conveyor Belt Size48 in (121.9 cm) wide with raised cleat
Conveyor Belt Type220 lb (99.8 kg), 2-ply, 2/16 in x 1/16 in (4.8 mm x 1.6 mm)
Conveyor Belt Stacking Height3 ft (0.9 m) x 12.5 ft (3.8 m)
Head Pulley TypeRubber lagged, 12 in (30.5 cm) diameter, 51 in (99.65 cm) wide
Head Pulley Bearing2.4 in (6.1 cm) pillow block
Self-Cleaning Tail Pulley Dimensions10 in (25.4 cm) diameter, 51 in (129.5 cm) wide with 2.4 in (6.1 cm) shaft
Head Pulley Takeup10 in
Rubber disc return idler size4 in diameter
Rattler roller return idler size5.4 in diameter
Overs Conveyor Frame2 in x 8 in (5.1 cm x 20.3 cm) structural steel tubing