After Hours Emergency Parts:
256-998-2806
After Hours Emergency Service:
256-777-7564
After Hours Emergency:
270-484-8299
Land Pride FMP2760
The Flail Mower head is easily removed by pulling 3 pins and detaching 3 hoses, allowing a Rotary Cutter head to be installed in its place.
Shopping Tools
FMP2760 Features & Benefits
| Features | Benefits |
| Tractor hp Range FMP(M)2760 FMP(M)3760 | Designed for 75 minimum hp (56 kW) tractor with minimum weight of 8,000 lbs (3629 kg) Designed for 95 minimum hp (71 kW) tractor with minimum weight of 12,000 lbs (5443 kg) |
| 3 Point Design | Does not tie up a tractor. Three point is easy to connect and disconnect from tractor. |
| Mower Deck Visibility | Visibility of the mower deck is captured from the operator's seat. Easy to see operation. Operator does not have to look behind. |
| Factory Assembled | Arrives ready for the customer, saves time and money. |
| Easy Greasing | All grease zerks are easily accessible for servicing. |
| 11' - 1" (3.38 m) Transport Width | Folds up close to the tractor. No weight brackets or decks hanging away from the tractor. Typically, not much wider than the tractor, which means safer transporting. |
| Parallel Arm Design | Three cylinders used in a parallel arm design allows any cylinder to be adjusted without changing the position of the others. Means less positioning. |
| Long Horizontal Reach FMP(M)2760 = 15'-6"" (4.72 m) FMP(M)3760 = 18'-10"" (5.74 m) | Good access for reaching vegetation far away from the tractor. Better access for reaching vegetation far away from the tractor. |
| Above Grade Vertical Reach FMP(M)2760 = 11'-5"" (3.47 m) FMP(M)3760 = 13'-5"" (4.08 m)" | Good access for reaching up embankments and cutting low over-hanging limbs. Better access for reaching up embankments and cutting low over-hanging limbs. |
| Below Grade Reach FMP(M)2760 = 9'-1"" (2.76 m) FMP(M)3760 = 11'-0"" (3.35 m) | Good access for reaching down embankments. Better access for reaching down embankments. |
| 180 Degree Operating Tilt Arc | Mower deck can be positioned to reach different angles. |
| Cat. 2 & 3; 540 or 1000 rpm | Fits a wide variety of tractors. |
| 40 Gallon (151L) Oil Reservoir | Large reservoir maintains optimum fluid temperatures and also serves as counterweight. |
| High Blade Tip Speed | High blade tip speed means cleaner cutting |
| 2"" (5 cm) Cutting Capacity (With Hammer Blades)" | Ideal for trimming brush. |
| Two Parking Stands | Easy and level storage, easy connecting to tractor. |
| In-line Filter | Cleans hydraulic fluid before it re-enters the reservoir. |
| Shut-off Valve | Permits maintenance with minimum oil loss. |
| Oil Pressure Gauge | Easily monitor oil pressure for optimum performance of unit. |
| Hydraulic Breakaway | Allows the parallel arms to pivot backwards to avoid obstacles and to protect mower deck and parallel arms. Parallel arms are pivoted back to normal operating position with the hydraulic breakaway cylinder. |
| Independent Control Option (Self-Contained Hydraulics) | Self contained hydraulic system eliminates the tractor/FMP hydraulic incompatibility. This option uses the FMP hydraulic system to operate the mower. |
| Kubota 3-Point Stabilizer Kit | Makes the FMP2760 Parallel Arm Flail Mower a match fit for Kubota tractor model numbers M126GX, M135GX, and M6-141. |
| Slow Moving Vehicle Mounting Socket (Standard) Slow Moving Vehicle Sign (Accessory)" | Mounting socket receives most slow moving vehicle signs equipped with a mounting blade for ease of attachment and removal when transporting on a truck or trailer. Slow moving vehicle sign is offered as an accessory when the tractor's slow moving vehicle sign and mounting blade does not fit the mower's standard |
FMP2760 Specs & Compare
| Specifications & Capacities | |
| Model Nos. | FMP(M)2760 |
| Power Take-Off Input Speed | 540 or 1000 rpm |
| Deck Motor rpm at Power Take-Off Speed | Approximately 1925 rpm |
| Minimum Tractor Horsepower | 75 hp (55.9 kW) |
| Minimum Base Tractor Weight | 8,000 lbs. (3629 kg) without added weights |
| Weight | 3,290 lbs. (1492 kg) |
| Cutting Width | 60" (152 cm) |
| Overall Width (Fully Extended) | 21' (6.43 m) |
| Transport Width | 11' - 1" (3.38 m) |
| Maximum Horizontal Reach from Center Tractor | 15'-6" (4.4 m) |
| Maximum Vertical Reach (Above Horizontal) | 11'-5" (3.5 m) |
| Maximum Vertical Reach (Below Horizontal) | 9'-1" (2.8 m) |
| Deck Rotating Arc | 180 Degrees |
| Blade Tip Speed | 9,250 fpm (47 mps) |
| Blade Rotation | Reverse |
| Cutting Capacity | 2" (5 cm) with Hammer blades / 1 1/2" (3.8 cm) with Heavy-duty Y blades |
| Deck Thickness | 10 GA (3.4 mm) |
| Speed Increaser Fluid Capacity | 1 Pint (.47 L) |
| Speed Increaser Fluid | 80-90W EP Gearlube |
| Reservoir Hydraulic Fluid Type | Mobilfluid 424 or equivalent For equivalent fluids, search on the web for "Mobilfluid 424" or go to www.mobil.com |
| Reservoir Capacity and Filter | 40 Gallons (151 liters) / Conventional 10 Micron Filter |
| Hydraulic Fluid Flow Rate | Approximately 15 gpm or 56.8 L/min. |
| Overload Protection | Hydraulic relief valve |
| Breakaway Protection | Hydraulic Cylinder |
| Driveline | ASAE Category 2 |
| Hitch | 3-Point Cat. 2 & 3 with clevis style lower hitch, Quick Hitch adaptable except with M126GX, M135GX, or M6-141 Kubota tractors |
| Skid Shoes | 1/4" (.63 cm) Reversible |
| Height Adjustment | Rear roller adjustable |
| Hydraulic Control Options | |
| Options | Tractor Control Independent Control With or Without Deck Float |
| Optional & Accessory Equipment | |
| Operator Protective shield | Angle iron frame with flattened expanded metal protective shield |
| Kubota 3-Point Stabilizer Kit | Available |
| SMV Sign (Accessory) | Slow moving decal on galvanized steel back sign and plated or galvanized mount |