After Hours Emergency Parts:
256-998-2806
After Hours Emergency Service:
256-777-7564
After Hours Emergency:
270-484-8299
Kuhn 4835-836F
The KUHN Krause 4835 in-line ripper is the ideal tool to fight soil compaction, one of the leading causes of yield reduction. With working depths of 8” to 16”, the 4835 provides aggressive soil fracturing, while retaining valuable crop residue on the field surface. This allows for greater root development and water infiltration into the soil, and effectively reduces runoff and soil erosion. KUHN Krause 4835 in-line rippers are available in rigid 4- to 7-shank models or folding 7- to 11-shank models with choice of 30”, 36”, 38” or 40” shank spacing dependent upon model. The 4835 can be equipped with spring reset, Pathfind’r™ or rigid, shear-bolt protected shanks for soils where rock is not a concern. A variety of shanks and points are available depending on your agronomic needs.
Shopping Tools
4835-836F Features & Benefits
3-POINT OR PULL-TYPE
3-Point or Pull-Type Configurations
3-Point Hitch
Designed for deep tillage with strength and durability in mind. Category 3, 3N, 4 & 4N 3-point hitch configurations are available dependent on machine configuration. 3-point hitches are integrated into a two-bar frame design with main members of heavy-duty, 6”x6” structural steel tubing.
Rear Lift Drawbar Pull-Hitch
Rear lift pull-hitch option available for all 4835-530F through 4835-1130F models for transport stability. The drawbar pull-hitch includes 280/70 R15 tires on the rear lift and 280/70 R15 front mounted gauge wheel tires.
SHANK MOUNTS
Shank Mounts to Match Your Field Conditions
Shear-Bolt
Rigid, shear-bolt mounts are an economical choice for soils where rocks or other obstacles are not a concern. Shear-bolt protection guards against shank damage from unexpected obstacles.
- Shear force: 10,000 pounds (approximate)
- 16” maximum shank working depth
- For non-rock conditions
Spring Reset
Recommended for field conditions where obstacles or rocks may be encountered. A 4”x4” welded tube provides strength.
- 2,500 pound point load
- 20” trip height
- 16” maximum shank working depth
- 36” underframe clearance
PathFind’R™
Exclusive pivoting design allows the shank to deflect up to 6 degrees on each side for a total of 12 degrees of movement.
- Basic spring reset design
- Makes deep ripping possible on contours or terraces
- Deflects impacts improving performance in rocky soils
- Smoother steering under full power with tracked tractors
- Reduces stress on implement frame and 3-point tractor hitch
- Not compatible with pull-type hitch
- 20” trip height
- 16” maximum shank working depth
- 36” underframe clearance
SHANK & POINT OPTIONS
A Variety of Options
The 4835 in-line ripper may be configured in many different ways to achieve your agronomic goals. Choose from a variety of shank, point and wing combinations to achieve your desired field finish. Surface field finish is primarily determined by the type of shank used with parabolic offering the most soil disturbance, followed by MRD and no-till. Compaction removal, residue incorporation and draft are determined by points and shank caps.
No-Till Shanks & Points
- Choice of ¾" no-till shank (normal conditions) or 1” no-till shank (extreme conditions)
- Austempered wear bar
- Choose from 1-3/4" or Double K® chromium carbide points with either 8” wing or low disturbance shank cap
Conservation Tillage Shanks & Points
- 1-1/4" MRD (minimum residue disturbance) shank
- Austempered wear bar
- Choice of Double K 7” wing ripper point or Double K 2-1/2” straight ripper point
4835-836F Specs & Compare
| SPECIFICATIONS | 4835-836F |
| Transport Width (ft/m) | 14'5" / 4.4 m |
| Frame Type | NEW Heavy-Duty Toolbar 6" x 6" Double Rank Toolbar |
| Number of Shanks | 8 |
| Shank Spacing (in/cm) | 36" / 91.4 cm |
| Working Width (ft/m) | 24' / 7.3 m |
| Spring Reset Shank Approximate Weight (lb /kg) | 8,464 / 3 839 |
| Shear Bolt Shank Approximate Weight (lb/kg) | 6,851 / 3 108 |
| STANDARD EQUIPMENT | |
| Hitch Type | Large Frame: CAT 4N, and 4 Compatible with Parking Stands |
| Coulter Blades | 22" x ¼" Smooth, 450 lb (250 kg) Down Pressure |
| Shank Mount | Spring Reset: 2,500 lb Point Load, 20" Trip Height |
| Shanks | No-Till Shank, ¾" Thick (Very Low Surface Disturbance), Austempered Wear Bar, Chromium Carbide Shank Side Protectors |
| Points | 1-¾" Austempered Ductile Points (No-Till Shanks Only) |
| Shattering Wing | 8" Austempered Shattering Wings |
| Depth Control | Ratchet Jack Adjustable Gauge Wheels |
| Gauge Wheels | (2) 20.5" x 8", Load Range E |
| Transport Locks and Safety | Slow Moving Vehicle Sign, High Visibility LED Transport Light Kit |
| OPTIONAL EQUIPMENT | |
| Hitch Type | Drawbar Pull Hitch with Rear Lift Wheels, Includes (4) 280/70R15" Tires, Duals, (4) 280/70R15" Front Mounted Gauge Wheels, (1) 4" x 16" and (1) 4-½" x 16" Cylinder, Color-Coded Hydraulic Hose Grips, All Hydraulic Hoses, Tongue Jack, CAT IV Hitch, Safety Chain (Less Parking Stands) |
| Shank Mount | Rigid: Shear-Bolt Protected, 10,000 lb (Shear Force) |
| Shank Mount | Pivoting PathFind'r™ Spring Reset, 2,500 lb (Not Compatible with Pull Hitch) |
| Shanks | MRD Shank, 1-¼" Thick (Minimum Residue Disturbance), Austempered Wear Bar |
| Shanks | HD No-Till Shank, 1" Thick (Low Surface Disturbance), Austempered Wear Bar, Chromium Carbide Shank Side Protectors |
| Points | Double K® 2" Chromium Carbide Points (No-Till Shank Only) |
| Points | Double K® 7" Wing Ripper Points |
| Points | Double K® 2-½" Straight Ripper Point |
| Shank Cap | Low Disturbance Shank Cap (In Lieu of Wing) |
| Wing Gauge Wheels | (2) 20.5" x 8", Load Range E (One per Wing) |
| Closing Wheels | (2) 4 x 16" Smooth Closing Wheels per Shank, Adjustable Spring Tension (Limit Shank Soil Blowout) |
| Shank Stagger Kit | Not Applicable |
| OPERATING INFORMATION | |
| Recommended Operating Speed (mph/km/h) | 4 - 7 / 6 - 11 |
| Recommended Working Depth | 8" - 16" / 20 - 41 cm |
| Recommended Tractor Power Range (PTO hp/kW) | 35 - 45 PTO Horsepower per Shank / 26 - 34 kW |