For many years the KMC Rip Strip has been the main stay in the Southeast for breaking the hard pan and preparing an in row seed zone for uniform seed planting and excellent soil to seed contact in a variety of tough conservation tillage conditions. Middles are left undisturbed, and row components are designed and positioned to run through tall standing grains or heavy crop residue without dragging.

  • Get a Quote Value Your Trade Request Brochure
  • Send to a Friend
  • Payment Calculator

    • Get information on the 6700 Series Rip / Strip

    Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

    Request Brochure

    Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

    Send your friend information on the 6700 Series Rip / Strip

    Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

    Requesting Trade In on 6700 Series Rip / Strip

    Contact Information
    Equipment Interested In
    Trade Information

    Request A Demo

    Fields with asterisks* are required.

    Loan Calculator

    Use the Loan Calculator to help you determine the financing and payment options that are best for you.

    Amount Financed ($)
    Interest Rate (%)
    Loan Term in Months
    Monthly Payment Calculated

    **The accuracy of this calculator and its applicability to your circumstances is not guaranteed. You should obtain personal advice from qualified professionals. This information is provided for illustrative purposes only and does not constitute an application. This notice does not guarantee loan approval, nor is it an offer or commitment to make a loan to you on the above terms.

Shopping Tools
Contact Salesman
Request Demo
Apply for Financing

6700 Series Rip / Strip Features & Benefits

Key Features

  • Swivel Coulters or CCR: Choice of spring loaded Swivel Residue Coulters or CCR
  • Ripper Shank: Reset on the Go Shank or Toggle Trip Shank trail and are in line with the residue cutting coulters Row Tillage Components: Choice of various Row Tillage Components are mounted rearward of the Shank on a separate Tool Bar that floats independent of the main Tool Bar on Parallel Linkages. Row tillage components remain in the soil when Shank trips. Additional down pressure can be applied to the tillage components with spring adjustment in the Parallel Linkages. Pneumatic Press Wheels can be substituted in lieu of Row Tillage components for sub soil no till applications
  • Units equipped with Swivel Coulters come equipped with one pair of screw type adjustable gauge wheels on six and eight row implements and two pair on twelve and 16 row implements. Additional gauge wheels may be required for additional flotation on twelve or 16 row implements that come equipped with Swivel Coulters. Units equipped with CCR in lieu of Swivel Coulters do not come equipped with Gauge Wheels. The CCR functions as Gauge Wheels. However, in some conventionally tilled dry, sandy, loamy conditions, rear mounted Gauge Wheels may be required to prevent the CCR from pushing soil.
  • Parking stands are standard
  • A complete line of Accessories (Gauge Wheels, Planter Supporting Lift Assist Wheels, Planter attaching Reach Arms, Helper Wheels, Row Markers, Row Cleaners) is available to complete the unit for almost any field application.

6700 Series Rip / Strip Specs & Compare

Hitch Type
4(36, 38, 40) Rigid
6(30) Rigid
6(36, 38) Rigid
6(40) / 8(30) Rigid
8(36,38,40)
Stack Fold
12(30,36,38)
12(40) / 16(30)
Stack Fold
CAT II-3 PT
X





CAT II - QC
X





CAT III - 3 PT
X
X
X
X
X
X
CAT III - QC
X
X
X
X
X
X
CAT III - NQC
X
X
X
X
X
X
CAT IV - NQC


X
X

X

Tool Bars

  • 4×7 inch front hitch bar, 7×7 inch mail Tool Bar
  • 2 1/2 inch for mounting Row Tillage components

 

Swivel Residue Cutting Coulters

  • 3/16 inch x 20 inch Dura Flute
  • 1000 Pounds down pressure
  • Four bolt, hub maintenance free, tri-ply sealed bearing

 

Shanks: (Reset on the Go or Toggle Trip)

  • Reset on the Go with lifting the impement
  • Simple mechanical trip requires stopping and lifting the implement to reset
  • One inch width
  • High-strength, abrasion resistant steel
  • Wear shin protected
  • Reset on the Go shanks with 6000 pounds of trip force
  • Up to 18″ subsoiling depth

 

Row Tillage Components

  • Prepares the soil at shank depths of 12″ to 18″
  • Parallel link connection allows floatation independent of the main tool bar.  Row Tillage Components remain in the soil when the shank trips
  • Down pressure springs in the Parrallel Linkages provide foe varying down pressure
  • Tillage coulters and press wheels are anle adjustable from 0 to 90 degrees

 

Cover Crop Roller(Patent pending)

  • Rolls down the cover crop in direction of travel while cutting residue, allowing shanks to operate without dragging at a depth reange of 12″ to 18″
  • Enhances moisture retention and weed suppression
  • 22″ diameter, 1/4″ thick, hardened allow steel blades.  Mounted in halves for ease of replacement
  • 10 3/4″ diameter roller