The KMC 6800 Series Ripper Bedder allows for deep tillage under the row and forming uniform peaked beds for bedded row crops in one pass. The parallel linkage connection between the front ripper tool bar and the rearward bedder tool bar, and the pneumatic gauge wheels on the bedder tool bar, allow the disc gangs the flotation needed to form beds on varying terrain that are consistent regardless of the operating depth of ripper shanks.   Requires approximately 25-40 HP per shank dpending on depth and soil conditions.

  • Get a Quote Value Your Trade Request Brochure
  • Send to a Friend
  • Payment Calculator

    • Get information on the 6800 Series Ripper Bedder

    Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

    Request Brochure

    Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

    Send your friend information on the 6800 Series Ripper Bedder

    Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

    Requesting Trade In on 6800 Series Ripper Bedder

    Contact Information
    Equipment Interested In
    Trade Information

    Request A Demo

    Fields with asterisks* are required.

    Loan Calculator

    Use the Loan Calculator to help you determine the financing and payment options that are best for you.

    Amount Financed ($)
    Interest Rate (%)
    Loan Term in Months
    Monthly Payment Calculated

    **The accuracy of this calculator and its applicability to your circumstances is not guaranteed. You should obtain personal advice from qualified professionals. This information is provided for illustrative purposes only and does not constitute an application. This notice does not guarantee loan approval, nor is it an offer or commitment to make a loan to you on the above terms.

Shopping Tools
Contact Salesman
Request Demo
Apply for Financing

6800 Series Ripper Bedder Features & Benefits

Key Features

  • On row ripper shanks attached to main 7×7″ tool bar
  • Two Disc Gang assemblies per row attached to rear 4×4″ tool bar
  • Parallel linkages connecting front main tool bar with rear tool bar permit Disc Gang assemblies to float independent of the Ripper Shanks
  • 8″ x 10″ adjustable Gauge Wheels on rear tool bar provide flotation for uniform bed heights
  • Parking stands
  • One pair adjustable Gauge Wheels are standard equipment on 6 and 8 row models.  Two pair Gauge Wheels are standard on 12 and 16 row models.  12 and 16 row mondels may require additional gauge wheels depending on soil conditions
  • Available with Reset on the Go or Toggle trip Shanks.

6800 Series Ripper Bedder Specs & Compare

Hitch Type
4(36,38,40)Rigid
4(46,48)
Rigid
6(30,36,38) Rigid
6(40)/8(30) Rigid
8(36,38,40) Stack Fold
8(46,48) Rigid
12(30,36,38)
12(40)/16(30)
Stack Fold
CAT II - 3 PT
X






CAT II - QC
X






CAT III - 3 PT
X
X
X
X
X
X
X
CAT III QC
X
X
X
X
X
X
X
CAT III - NQC
X
X
X
X
X
X
X
CAT IV - NQC

X
X
X

X
X

Tool Bars

  • 4×7 inch front hitch bar, 7×7 inch mail Tool Bar
  • 4×4″ rear tool bar

Shanks: (Reset on the Go or Toggle Trip)

  • Reset on the Go with lifting the impement
  • Simple mechanical trip requires stopping and lifting the implement to reset
  • One inch width
  • High-strength, abrasion resistant steel
  • Wear shin protected
  • Reset on the Go shanks with 6000 pounds of trip force
  • Break hardpan at depths to 18″

Disc Gangs

  • Two disc per gang (18″ and 20″ on models other than 30″ row models)
  • 20″ single disc per gangs on 30″ row models
  • Four position angle adjustment
  • Axle: 1 1/8″ square
  • Bearings: 1 1/8″ tri-ply seal, maintenance free. square bore
  • Prepares the soil at shanks depths of 12″ to 18″

 

Available Models

Rigid Bar Models
Description
Weight (IBS)
Transport Width
68-04-36
4 Rows 36" Rows

161 in
68-04-38
4 Rows 38" Rows

161 in
68-04-40
4 Rows 34" Rows

161 in
68-04-46
4 Rows 46" Rows

200 in
68-04-48
4 Rows 48" Rows

260 in
68-06-30
6 Rows 30" Rows

183 in
68-06-36
6 Rows 36" Rows

229 in
68-06-38
6 Rows 38" Rows

 299in
68-06-40
6 Rows 40" Rows

251 in
68-08-30
8 Rows 30" Rows

251 in





Stack Fold Models
Description
Weight (IBS)
Transport Width
68-08-36R
8 Row 36" Rows

162 in
68-08-38R
8 Row 38" Rows

162 in
68-08-40R
8 Row 40" Rows

162 in
68-08-46R
8 Row 46" Rows

230 in
68-08-48R
8 Row 48" Rows

240 in
68-12-30R
12 Row 30" Rows

220 in
68-12-36R
12 Row 36" Rows

242 in
68-12-38R
12 Row 38" Rows

242 in
68-12-40R
12 Row 40" Rows

288 in
68-16-30R
16 Row 30" Rows

288 in