After Hours Emergency Parts:
256-998-2806
After Hours Emergency Service:
256-777-7564
After Hours Emergency:
270-484-8299
Hustler Turf X-One 54"
Built For All Day, Every Day Performance.
The X-ONE® is built for the full-time commercial landscaper to provide all day, every day performance. It offers a choice of carbureted or fuel-injected engines and a selection of side or rear-discharge decks. The X-ONE sets the standard for commercial zero-turn value.
Shopping Tools
X-One 54" Features & Benefits
Commercial-Grade Engines
Kawasaki® FX, Kohler® Command Pro® and Vanguard® Engine options backed by 3 year limited warranties.
I3M™ Seat
High-back seat with adjustable armrests and 3-inch suspension travel range.
VX Deck
Engineered for extreme vaccum, the all new Hustler VX deck more efficiently draws the grass up into the mower blades providing a cleaner cut which in turn creates a superior after cut appearance.
X-One 54" Specs & Compare
| Model | X-ONE 54" |
| ENGINE MANUFACTURER | Kawasaki FX730 |
| ENGINE HORSEPOWER | 23.5 |
| TRANSMISSION | Parker unitized 12cc/rev pump with 15.9ci/rev wheel motors |
| FUEL CAPACITY | 11.7 gal. |
| GROUND SPEED (FWD) | Up to 10.5 mph |
| CUTTING WIDTH | 54" Rear Discharge |
| CUTTING HEIGHT | 1" to 5.5" |
| FRONT TIRE | 13 x 6.5-6 |
| DRIVE TIRE | 24 x 9.5-12 |
| Engine | |
| ENGINE MANUFACTURER | Kawasaki FX730 |
| ENGINE HORSEPOWER | 23.5 |
| DISPLACEMENT | 726cc |
| COOLING | Air Cooled |
| AIR CLEANER | |
| Drive System | |
| TYPE | Dual Hydrostatic |
| TRANSMISSION | Parker unitized 12cc/rev pump with 15.9ci/rev wheel motors |
| HYDRAULIC LINES | |
| RESERVOIR CAPACITY | |
| HYDRAULIC COOLING | Transmission mounted fan |
| FUEL CAPACITY | 11.7 gal. |
| GROUND SPEED (FWD) | Up to 10.5 mph |
| PARKING BRAKE | Integrated with steering levers |
| Deck | |
| CUTTING WIDTH | 54" Rear Discharge |
| CUTTING HEIGHT | 1" to 5.5" |
| DECK DEPTH | 5.5" |
| DECK LIFT | Foot Operated |
| NUMBER OF BLADES | 3 |
| BLADE LENGTH | 18.50" |
| BLADE TIP SPEED | 18,300 |
| SPINDLES | Ductile cast iron with steel shaft and sealed ball bearings |
| DECK ENGAGEMENT | Electric PTO Clutch |
| DECK MATERIAL | Fabricated 7 gauge with 7 gauge wrappers |
| SPINDLE MOUNTS | 10 ga. with 11 ga. doubler |
| IMPACT TRIM AREA | Front of deck: 11 gauge formed channel with rolled edge |
| ANTI-SCALP WHEELS | |
| Construction | |
| FRAME | 1.50" X 3" steel tubing |
| ENGINE PLATE | |
| OPERATOR PLATFORM | |
| FRONT AXLE | Fabricated with tapered roller bearings |
| FRONT CASTER WHEEL | Tapered wheel bearings and debris cap |
| FRONT CASTER FORK | Fabricated 1/2" steel |
| General | |
| SEAT | I3M Suspension Seat |
| CUP HOLDER | Yes |
| Dimensions | |
| FRONT TIRE (INCHES) | 13 x 6.5-6 |
| DRIVE TIRE (INCHES) | 24 x 9.5-12 |
| WING TIRE (INCHES) | |
| WEIGHT (LBS) | 1275 |
| HEIGHT (INCHES) | 49, 72.5 w/ ROPS up |
| LENGTH (INCHES) | 80.2 |
| WIDTH W/ CHUTE UP (INCHES) | 55.72 |
| TIRE-TO-TIRE WIDTH (INCHES) | 51 |
| PRODUCTIVITY (ACRES PER HOUR) | 5.73 |